Author Topic: Jdm-040 not charging  (Read 3488 times)

Offline Stackhouse

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Jdm-040 not charging
« on: April 21, 2019, 07:46:05 AM »
Hi, I have this model that is not charging, only works with cable, the battery is dead. If I put a good battery it doesnt recognize it either, looks like the "IC" or something that connects the batery with the mainboard is not working.
Any tips? Sorry for my English

PS: the mainboard looks fine,
« Last Edit: April 21, 2019, 07:48:31 AM by Stackhouse »

Offline mohamadps3ps4

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Jdm-040 not charging
« Reply #1 on: June 07, 2020, 01:45:36 PM »
hi my controller not charging no light nothing  jdm-40

Offline igrica

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Jdm-040 not charging
« Reply #2 on: January 17, 2021, 11:50:46 AM »
hi, newbie here.

I also got the charging problem with 040.
I've noticed that something looking like capacitor is shorted (it might be coil, though).

I've circled it on the schematics that someone provided in another thread:


« Last Edit: January 17, 2021, 11:51:32 AM by igrica »

Offline wickated

  • King of the Wii-tards
  • *
  • Posts: 176
  • Post quality +0/-1
  • Acidmods User
Re: Jdm-040 not charging
« Reply #3 on: January 17, 2021, 06:38:43 PM »
hi, newbie here.

I also got the charging problem with 040.
I've noticed that something looking like capacitor is shorted (it might be coil, though).

I've circled it on the schematics that someone provided in another thread:



its a coil, it should be liike shorted

Offline igrica

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Jdm-040 not charging
« Reply #4 on: January 18, 2021, 06:54:01 AM »
damn.
what about three tiny ones near the flexible cable going to usb? the one in middle seems open, and other two are shorted I think.
perhaps the middle one should be shorted too?
assuming those are fuses.

Offline igrica

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Jdm-040 not charging
« Reply #5 on: January 25, 2021, 01:19:46 PM »
what about this one, is it capacitor or coil?
it also seems shorted.


Offline Adriansn

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Jdm-040 not charging
« Reply #6 on: May 23, 2022, 04:02:38 PM »
Hola compa?ero eso es una bobina y siempre va a dar continuidad si mides entre sus extremos,la manera correcta de saber si esta la linea en corto es colocar el multimetro en continuidad y realizar la medicion con una punta en tierra y la otra no te tiene que dar continuidad en ninguno de los 2 extremos de la bobina

Offline cruchot.59

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Jdm-040 not charging
« Reply #7 on: July 08, 2022, 08:25:05 AM »
I have the same problem,  2 resistors burn on the line d+ and d- can you give me the value of these resistors



Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Jdm-040 not charging
« Reply #8 on: July 10, 2022, 07:56:36 AM »
27 ohms
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal