« previous next »
Pages: [1]   Go Down

Author Topic: xbox 360 wireless controller sensor analogue trace broken....  (Read 1927 times)

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
xbox 360 wireless controller sensor analogue trace broken....
« on: February 07, 2020, 03:06:58 PM »
I tried to replace sensor analog of xbox 360 controller wireless and i have broken...how i could fix?



Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2595
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #1 on: February 11, 2020, 01:19:26 PM »
You will have to solder to a couple of vias to repair that damage now.

https://www.acidmods.com/forum/index.php/topic,34545.0.html
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #2 on: February 13, 2020, 03:55:35 AM »
https://www.acidmods.com/RDC/360/Wireless_Matrix_Bottom.jpg

wait, i need solder only 4 four trace for the sensor? and the other pin?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2595
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #3 on: February 13, 2020, 11:57:48 AM »
You need those 4, and also make sure the AN+ and Ground for each POT is also connected. The Grounds of them look alright in those pics, but the AN+ need connected, and they can go to TP7 on the board.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #4 on: February 13, 2020, 02:13:00 PM »
Ehm sorry this is my first time, AN+ where is? and  how i conneted to pot? you can show me with a pics?
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2595
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #5 on: February 13, 2020, 02:41:26 PM »
The other torn up pin you asked about, run that to TP7.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #6 on: February 13, 2020, 04:23:46 PM »
Than all rest of torn, i have connect them to tp7. Sorry forbad english, i am italian.
Logged

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #7 on: February 13, 2020, 04:44:34 PM »


Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2595
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #8 on: February 13, 2020, 04:47:16 PM »
Just connect the 2 at the stick on the right to TP7. Leave the other 2 for the stick button alone, you don't need all 4 of those connected, only the 2 in the earlier pic.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #9 on: February 13, 2020, 04:59:52 PM »


Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2595
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #10 on: February 13, 2020, 05:04:08 PM »
Large line yes, connect those 2 to TP7.

I have no idea what the other 2 lines there are supposed to be.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline zis2104

  • Who Farted ???
  • *
  • Posts: 207
  • Post quality +0/-0
  • Acidmods User
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #11 on: February 13, 2020, 05:12:03 PM »
Another lineas are error, and tp7 are the circle in yellow right? Sorry it's first time for me, don't kill me.
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2595
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: xbox 360 wireless controller sensor analogue trace broken....
« Reply #12 on: February 13, 2020, 05:15:45 PM »
TP7 is that 'yellow circle' yes, you can solder to that, it is gold plating that is on the copper trace there.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal