« previous next »
Pages: [1]   Go Down

Author Topic: Ripped 1708 Joystick Solder Pad  (Read 762 times)

Offline dragon2812

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Acidmods User
Ripped 1708 Joystick Solder Pad
« on: December 28, 2020, 06:31:44 AM »
Hey guys,

I tried to replace the left joystick on my 1708 controller but I accidentially ripped off the middle one of the solder pads for the y-Axis potentiometer.

Someone mentioned this problem in a reddit post and he shared a link with a few pictures on imgur so I will include this link for you:

https://imgur.com/a/Z4MAiMU

This is exactly how my solder point looks. Only this pad is missing and I checked the schematics on https://www.acidmods.com/forum/index.php?topic=43981.0 , but I don't know where I can solder a jumper wire to.

I hope some of you may have an idea how to fix this...

Thanks!
« Last Edit: December 28, 2020, 06:32:08 AM by dragon2812 »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Ripped 1708 Joystick Solder Pad
« Reply #1 on: December 28, 2020, 11:44:14 AM »
Solder a jumper wire from the lead there to TP63.
« Last Edit: December 28, 2020, 11:54:14 AM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline dragon2812

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Acidmods User
Re: Ripped 1708 Joystick Solder Pad
« Reply #2 on: December 28, 2020, 12:59:47 PM »
Okay thank you very much! I will try that out!
Logged

Offline Sperotto

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Ripped 1708 Joystick Solder Pad
« Reply #3 on: December 29, 2020, 10:56:54 AM »
Hi! I have the same issue, but with those pads:





Anyone can helpme?
 
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Ripped 1708 Joystick Solder Pad
« Reply #4 on: December 29, 2020, 11:22:47 AM »
Jumper the left one to the bottom one of the 3 on the left.  4 to 3
Center one goes to TP64. 5 to TP64
Jumper the Right one to the Top one of the 3 on the left.  6 to 1

Code: [Select]
1
2
3
   4  5  6
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Sperotto

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Ripped 1708 Joystick Solder Pad
« Reply #5 on: December 29, 2020, 11:25:32 AM »
Thank you!!! Save the day here!
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal