Author Topic: DS4 Board JDM-040 Problem  (Read 1158 times)

Offline jvcj

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
DS4 Board JDM-040 Problem
« on: April 24, 2021, 07:49:04 AM »
hi
I changed analog right stick...after changed analog good work..but Button R1 Automatic always Pressed
what is the problem?
How can I solve the problem?
I am very upset because I only used it for 2 months

https://imgur.com/jjlJdp5




« Last Edit: April 24, 2021, 07:52:53 AM by jvcj »

Offline HyperMax

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: DS4 Board JDM-040 Problem
« Reply #1 on: April 25, 2021, 12:34:05 AM »
Did you change analog carefully? You could damage solder tracks or points. And another reason it can be button flex board - make sure it contacting good with the main board

Offline jvcj

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Re: DS4 Board JDM-040 Problem
« Reply #2 on: April 25, 2021, 03:59:50 AM »
thx
Even without a Flex still problem r1 always pressed.

I really don't know where the problem comes from..And how should I solve the problem

Please help me


« Last Edit: April 25, 2021, 06:16:37 AM by jvcj »

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 Board JDM-040 Problem
« Reply #3 on: April 25, 2021, 06:20:46 AM »
Without the daughterboard connected the controller can do all kinds of weird things.

Post a pic of the top side of the board, there is a Pull-Down Resistor that needs to be on there to keep R1 off until it is pressed. If that were knocked off the board or damaged it could cause that issue.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline jvcj

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Re: DS4 Board JDM-040 Problem
« Reply #4 on: April 25, 2021, 08:11:29 AM »
very thanks for answering

https://imgur.com/7rymjqZ

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 Board JDM-040 Problem
« Reply #5 on: April 25, 2021, 08:19:43 AM »
Yeah it's missing. Replace that and you'll be good to go.

It's a 100k, 0402 size Resistor.

Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline jvcj

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Re: DS4 Board JDM-040 Problem
« Reply #6 on: April 25, 2021, 08:26:45 AM »
i really appreciate u

Offline jvcj

  • Chief squatting Hard
  • *
  • Posts: 13
  • Post quality +0/-0
  • Acidmods User
Re: DS4 Board JDM-040 Problem
« Reply #7 on: April 25, 2021, 04:33:25 PM »
I fixed it

But hardly because  100k, 0402 resistor is very very small

Thanks again for solving my problem

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: DS4 Board JDM-040 Problem
« Reply #8 on: April 25, 2021, 04:34:41 PM »
Welcome.
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal