« previous next »
Pages: [1]   Go Down

Author Topic: stuck RB button  (Read 1055 times)

Offline Jimit5

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
stuck RB button
« on: May 02, 2021, 06:15:06 AM »
my RB button is constantly pressed even after removing the switch is there anything that i can do ?


Images of the board
https://drive.google.com/file/d/13H2HohdK_hHt1aGHMgMuSsGHOQ1y4GYp/view?usp=sharing
https://drive.google.com/file/d/1JA2YYO8ICxMYLECFgWtbYsph29cyudhN/view?usp=sharing
Logged

Offline wickated

  • King of the Wii-tards
  • *
  • Posts: 176
  • Post quality +0/-1
  • Acidmods User
Re: stuck RB button
« Reply #1 on: May 02, 2021, 06:29:39 AM »
take a look at throuholes. maybe yoy accidentaly made solder bridge to ground plane.
Logged

Offline Jimit5

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: stuck RB button
« Reply #2 on: May 02, 2021, 06:50:10 AM »
i haven't touched anything else is the pin pulled high internally ? there is no voltage between rb and ground
Logged

Offline wickated

  • King of the Wii-tards
  • *
  • Posts: 176
  • Post quality +0/-1
  • Acidmods User
Re: stuck RB button
« Reply #3 on: May 02, 2021, 09:34:51 AM »
Quote from: Jimit5 on May 02, 2021, 06:50:10 AM
is the pin pulled high internally ?
yes.
check d3 and c29.
Logged

Offline Jimit5

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: stuck RB button
« Reply #4 on: May 02, 2021, 09:52:42 AM »
both d3 and c29 should be grounded right
 i also removed c29 r44 that should disconnect the lower pcb right but RB is still pressed

also noticed that RB is not pressed until anything is pressed once you press anything its pressed and doesn't release
« Last Edit: May 02, 2021, 10:47:20 AM by Jimit5 »
Logged

Offline Jimit5

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: stuck RB button
« Reply #5 on: May 04, 2021, 06:19:02 AM »
SOLVED removed c43 and everything is working the question is should i replace it and if yes what is the correct value
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal