Jdm-040 not charging

[Stackhouse]

Hi, I have this model that is not charging, only works with cable, the battery is dead. If I put a good battery it doesnt recognize it either, looks like the "IC" or something that connects the batery with the mainboard is not working.
Any tips? Sorry for my English

PS: the mainboard looks fine,

[mohamadps3ps4]

hi my controller not charging no light nothing  jdm-40

[igrica]

hi, newbie here.

I also got the charging problem with 040.
I've noticed that something looking like capacitor is shorted (it might be coil, though).

I've circled it on the schematics that someone provided in another thread:

[wickated]

hi, newbie here.

I also got the charging problem with 040.
I've noticed that something looking like capacitor is shorted (it might be coil, though).

I've circled it on the schematics that someone provided in another thread:

its a coil, it should be liike shorted

[igrica]

damn.
what about three tiny ones near the flexible cable going to usb? the one in middle seems open, and other two are shorted I think.
perhaps the middle one should be shorted too?
assuming those are fuses.

[igrica]

what about this one, is it capacitor or coil?
it also seems shorted.

[Adriansn]

Hola compa?ero eso es una bobina y siempre va a dar continuidad si mides entre sus extremos,la manera correcta de saber si esta la linea en corto es colocar el multimetro en continuidad y realizar la medicion con una punta en tierra y la otra no te tiene que dar continuidad en ninguno de los 2 extremos de la bobina

[cruchot.59]

I have the same problem,  2 resistors burn on the line d+ and d- can you give me the value of these resistors

[RDC]

27 ohms