« previous next »
Pages: [1]   Go Down

Author Topic: 1708 controller turn off when release guide button  (Read 718 times)

Offline fabiomtdai

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
1708 controller turn off when release guide button
« on: October 25, 2021, 07:21:47 AM »
Hello Guys, my controller works only with the guide button pressed, but when release the button turns off, any ideas where i start to test thanks
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 controller turn off when release guide button
« Reply #1 on: October 26, 2021, 12:09:52 PM »
https://acidmods.com/forum/index.php/topic,43981.msg337102.html#msg337102

Schematic for the 1708 is in the pinned topics also.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline APintoZ

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 controller turn off when release guide button
« Reply #2 on: October 26, 2021, 01:02:40 PM »
Hello, I had the exact same problem and it was a scratch between R7 and D26 that broke the trace. A jump wire between both fixed the problem. Good luck!
Logged

Offline fabiomtdai

  • Guppy
  • *
  • Posts: 2
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 controller turn off when release guide button
« Reply #3 on: October 27, 2021, 07:41:44 AM »
Very thanks for the help, in my case the track from J1p9 is broken in top board. Your schematic is very helpfull, save my controller, great job!!!
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal