« previous next »
Pages: [1]   Go Down

Author Topic: 1708 no power when black lead connector plugged in?  (Read 759 times)

Offline Nick_Sparkle

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
1708 no power when black lead connector plugged in?
« on: November 05, 2021, 07:08:41 AM »
can anyone help please? was getting no power wired or with batteries so i took it apart, it powered up wired but as soon as I connect the power board to the analog board with the black internal lead/connector i get no power? does anyone know why and how i can fix it? thank you in advance, Nick
Logged

Offline Nick_Sparkle

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 no power when black lead connector plugged in?
« Reply #1 on: November 05, 2021, 07:13:23 AM »
its something oe analog board as ive tried with 2 known working power boards and it is doing the same
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2600
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 1708 no power when black lead connector plugged in?
« Reply #2 on: November 05, 2021, 08:52:32 PM »
Could be any number of things. First place to start looking is just all over the board for anything that doesn't look right. After that, I'd inject 3.3v into the 3.3v rail of the bottom board alone and see what gets hot first. Might just be a shorted Capacitor causing it, might be a fragged MCU or could be anything in between.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Nick_Sparkle

  • Fart Sniffer
  • *
  • Posts: 40
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 1708 no power when black lead connector plugged in?
« Reply #3 on: November 05, 2021, 10:30:19 PM »
Thanks again for your help
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal