JDM-011 and 030 issues

[Stackhouse]

Hi, the 011 works great on DS4windows, obviously plugged in, but it doesnt do anything wirelessly, it also doesnt work on the PS4
And the 030 the same, but on the PS4 it shows a question mark on the battery logo.

any tips?
thx

[Baldur]

Change the battery with a proper one.
Could it be, that the BT Chip is bad?

[Eren_Ackerman]

Both boards with exactly the same problem? I think you could try another usb cable and reset the boards for 1 minute to rule out basic possibilities.

For the controllers to work wirelessly on PC you have to press and keep pressed the Share button plus the PS button for about 7 seconds until the light flashes repeatedly; that's the way to activate the bluetooth pairing mode. Obviously you need a PC with bluetooth.

If the controllers do connect to your PC after what I said above, the next thing would be to rule out problems with the PS4 itself. It's very common that the Wifi/Bluetooth chip goes apparently bad because of bad solder balls under the module.

If you already tried all of that, we would need more details.