« previous next »
Pages: [1]   Go Down

Author Topic: 055 analog hard drift left, won't go to the right.  (Read 559 times)

Offline ChrisJavier

  • Fart Sniffer
  • *
  • Posts: 44
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
055 analog hard drift left, won't go to the right.
« on: January 17, 2022, 06:27:45 PM »
Hello. I got this 055 that's drifting a lot to the left and won't go to the right. Replaced the sticks a few times and still the same issue. Tester:


Tested for voltages of the pot

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2597
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 055 analog hard drift left, won't go to the right.
« Reply #1 on: January 18, 2022, 03:11:55 AM »
You'll need to tweak that POT manually first to get the thing closer to center. Then if it's still all jittery like that toss a 100nF cap between any 2 pins of the POT to see if that knocks that down any, but it needs to be tweaked closer to what it thinks center is first.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline ChrisJavier

  • Fart Sniffer
  • *
  • Posts: 44
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 055 analog hard drift left, won't go to the right.
« Reply #2 on: January 18, 2022, 08:37:01 AM »
The problem is that it straight up doesn't detect the analog going right. It works vertically but doesn't have any movement horizontally
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2597
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 055 analog hard drift left, won't go to the right.
« Reply #3 on: January 18, 2022, 09:52:10 AM »
Then make sure the RSX trace isn't damaged. If the plating was torn out of the hole there for the RSX line it would solder on the bottom, but the trace is on the top, so it would look connected and you'd get voltage measurements, but really the RSX line would just be floating, which could explain the jitter also.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline ChrisJavier

  • Fart Sniffer
  • *
  • Posts: 44
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 055 analog hard drift left, won't go to the right.
« Reply #4 on: January 18, 2022, 11:19:35 AM »
You're the best RDC. Fixed, thank you
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2597
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: 055 analog hard drift left, won't go to the right.
« Reply #5 on: January 18, 2022, 07:08:34 PM »
Welcome.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal