« previous next »
Pages: [1]   Go Down

Author Topic: JDM 011 burned IC after polarity reversal  (Read 1097 times)

Offline lxd

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
JDM 011 burned IC after polarity reversal
« on: July 22, 2022, 05:59:47 PM »
Hi,

Long time lurker, first time poster, first of all thanks anyone for all your advice

I've got a 011 which arrived in my hands with a note "Polarity reversed".
I've ordered a new battery but i also need to replace an IC which died. Does anyone have info on a part number? It looks like a LDO but can't detemine the type for sure..

Thanks in advance and have a nice day !

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: JDM 011 burned IC after polarity reversal
« Reply #1 on: July 22, 2022, 08:33:10 PM »
Not an LDO, it's a TVS array for the USB data lines. Not sure of the exact part number or a suitable cross for it right now, but you can just remove it for a test to make sure everything works good before hunting for a replacement or snagging one from a donor board.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline Eren_Ackerman

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 64
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM 011 burned IC after polarity reversal
« Reply #2 on: July 26, 2022, 07:20:16 PM »
I decided to take a picture for posterity, in case anyone needs to see the component in the future.


It says 6.8 and there are three points below the "8" and only one below the "6". No idea what they mean yet xd
Logged

Offline Daywalk3r

  • ½ Pint
  • *
  • Posts: 39
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: JDM 011 burned IC after polarity reversal
« Reply #3 on: July 27, 2022, 11:49:22 PM »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal