« previous next »
Pages: [1]   Go Down

Author Topic: R1 Dualsense model BDM-010 is activating alone  (Read 765 times)

Offline blueloogann

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
R1 Dualsense model BDM-010 is activating alone
« on: September 27, 2023, 04:29:51 PM »
Hello guys, how are you? Guys, I'm here to ask for your help, my control is having this problem, it's activating R1 on its own, as if it's being pressed, I've already disassembled it all, so I left the board connected to the USB Type-C cable and the button R1 remains pressed. Does anyone here know what's happening and how to fix it? I've already cleaned the entire board with isopropyl alcohol and looked under the microscope and didn't find anything different. Thanks.

link photos below



« Last Edit: September 27, 2023, 04:41:26 PM by blueloogann »
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: R1 Dualsense model BDM-010 is activating alone
« Reply #1 on: September 27, 2023, 06:51:30 PM »
Remove the circled Cap and retest. If it's still pressed after that, then it's either a short on that R1 line, and it's on an internal layer, or the MCU has an issue. A good cleaning that gets under the BGA chip or a reflow of it might resolve it.

Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline blueloogann

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: R1 Dualsense model BDM-010 is activating alone
« Reply #2 on: September 28, 2023, 07:10:17 AM »
Thanks Bro I Will try this!
« Last Edit: September 28, 2023, 07:11:14 AM by blueloogann »
Logged

Offline blueloogann

  • Guppy
  • *
  • Posts: 3
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: R1 Dualsense model BDM-010 is activating alone
« Reply #3 on: October 15, 2023, 08:18:15 AM »
Unfortunately it didn't work, I removed the circled Cap and blew hot air across the entire board but the problem continues.  :sadno:
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2611
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: R1 Dualsense model BDM-010 is activating alone
« Reply #4 on: October 15, 2023, 02:23:17 PM »
How does it act with both of the Trigger modules plugged in? With the board like that, there are 4 Analog lines floating, and they can cause all manner of weird issues.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal