« previous next »
Pages: [1]   Go Down

Author Topic: Series X/S 1914 Controller no RSX RSY pad traceback  (Read 1063 times)

Offline olane123

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Series X/S 1914 Controller no RSX RSY pad traceback
« on: February 24, 2024, 12:28:17 AM »
Hi everyone new to the forum looking for some expertise, i have a few 1914 controllers all with missing pads and no RSX RSY like theyre completely dead, i've tried to solder to the test points

TP65 - RSY and TP125 RSX

But they're still dead does anyone know where i can jumper wire to so as to get this working again?

Thanks
Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Series X/S 1914 Controller no RSX RSY pad traceback
« Reply #1 on: February 24, 2024, 05:42:25 AM »
RSX is TP112

If the trace/via there between the RSY solder joint and TP65 is messed up, then you'll need to jumper from the RSY to the SOC board p13 connection.

If the lines are really dead and the MCU has an issue, then there's no jumpering anything anywhere that will make them work again.

https://acidmods.com/forum/index.php/topic,44711.0.html
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline olane123

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Series X/S 1914 Controller no RSX RSY pad traceback
« Reply #2 on: February 25, 2024, 11:41:05 PM »
Thank you for the help just so im sure is the blue pin highlighted Pin 13 or have i gone round the board wrong  :huh:

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Series X/S 1914 Controller no RSX RSY pad traceback
« Reply #3 on: February 26, 2024, 05:06:12 AM »
The main board there has some of the pin/pad numbers for that board on it. 1 (dot), 8, 10, 15, 16, 27, 32, 44 and 45, so you're on the right one there.
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.

Offline olane123

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Series X/S 1914 Controller no RSX RSY pad traceback
« Reply #4 on: February 27, 2024, 04:44:49 AM »
Amazing, thank you for your help :drunk: :#1:
Logged

Offline olane123

  • Guppy
  • *
  • Posts: 4
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: Series X/S 1914 Controller no RSX RSY pad traceback
« Reply #5 on: February 28, 2024, 01:49:12 AM »
Quote from: RDC on February 26, 2024, 05:06:12 AM
The main board there has some of the pin/pad numbers for that board on it. 1 (dot), 8, 10, 15, 16, 27, 32, 44 and 45, so you're on the right one there.

Also out of interest what pin on the SOC is RSX if TP112 is dead? Thanks

Logged

Offline RDC

  • Administrator
  • Around the block
  • *
  • Posts: 2609
  • Post quality +90/-2
  • Gender: Male
  • The CGnome Project
Re: Series X/S 1914 Controller no RSX RSY pad traceback
« Reply #6 on: April 10, 2024, 01:52:39 PM »
Sorry, didn't see your reply to this until now.

RSX is p15 of the SOC board, the schematic is in the thread that is linked above.
« Last Edit: April 10, 2024, 01:54:04 PM by RDC »
Logged
Screwing up is one of the best learning tools, so long as the only thing you're not learning is how to screw up.
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal