Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: 123sample on December 17, 2008, 08:28:08 AM
-
______________________________________________________
WHERE TO BUY
______________________________________________________
1. Analog replacement [normal]
http://www.dealextreme.com/details.dx/sku.3373 (http://www.dealextreme.com/details.dx/sku.3373)
2. Analog replacement [transparent]
http://www.dealextreme.com/details.dx/sku.12004 (http://www.dealextreme.com/details.dx/sku.12004)
3. Razor X
http://www.coolmods.co.uk/catalog/product_info.php?products_id=190 (http://www.coolmods.co.uk/catalog/product_info.php?products_id=190)
______________________________________________________
INSTALLING
______________________________________________________
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg90.imageshack.us%2Fimg90%2F2633%2Fhoho2il2.jpg&hash=80f9d4794ba55a52e348bb5864eae5cf65fb5fdf) (http://imageshack.us)
______________________________________________________
DEMO
______________________________________________________
http://www.youtube.com/v/nL4wwiVQJVc&hl=en&fs=1&color1=0x402061&color2=0x9461ca
*Maximizing is not recommended
-
Thanks that helps me out alot no wonder i couldn't get it to work lol
i never tinned and i throw away 2 razor x's like 3weeks ago when i cleaned my room :faint: well to bad they weren't like new but they still would have worked :cry2:
-
You just summed up all my problems in this post
Thanks man :tup:
-
NICE! That helps me soooo much :clap:
-
Thanks that helps me out alot no wonder i couldn't get it to work lol
i never tinned and i throw away 2 razor x's like 3weeks ago when i cleaned my room :faint: well to bad they weren't like new but they still would have worked :cry2:
They definitely still alive, even bit broke, you could still wire it manually I think..
have you done double nub?
-
no i never did it before i am going to once i sell my phoenix psp and clear all my debt hopefully i will have enough money for a fader and razor x for this new psp and a cr-5400 and speakers OMG i think i am already digging my new debt hole
-
CR-5400 n stuffs, I got mine dual Micro SDHC..
-
STICKIED
-
STICKIED
Woooooo u got a sticky Nice job man now this thread will never go away lol and its easier for me to find once i get a razor x
-
Yep
-
can't wait i am going to do that if its not to hard
-
is the analog replacement only for razor x?
also where could i get clear buttons?
-
Analog replacement is the phat analog replacement. Clear buttons from dealextreme.com (http://dealextreme.com)
Hey gratz on sticky! Like ghetto said, now I can find it easily when I eventually get a razorx!
-
http://www.dealextreme.com/details.dx/sku.2979 (http://www.dealextreme.com/details.dx/sku.2979)are these the right ones?
i looked for analog and i couldnt find a clear one. any help on that?
-
http://www.dealextreme.com/details.dx/sku.2979 are these the right ones?
i looked for analog and i couldnt find a clear one. any help on that?
Nope, those aren't the right ones - they're for the phat. And sorry about giving you the link for dealextreme. Turns out they only have phat ones. Coolmods, an official sponsor of AcidMods, does have psp slim clear buttons though. Unfortunately, it might set you back 15-20 bucks for just a set of buttons. For the analog, if you're using it to do this mod, then it's in the original post, but I'll give it to you again. If you're looking for one to replace your existing slim analog, then unfortunately, I can't find one.
Psp slim clear buttons
http://www.coolmods.co.uk/catalog/product_info.php?products_id=195 (http://www.coolmods.co.uk/catalog/product_info.php?products_id=195)
Psp phat clear analog
http://www.dealextreme.com/details.dx/sku.12004 (http://www.dealextreme.com/details.dx/sku.12004)
-
ahhhhhh thats bad =[ i rly want clear analog plus buttons and leds in each one of them but not home ones.
-
The Analogs at DX are so cheap couldn't you just get one for a Phat and one for a slim and swap out the parts to make a clear or at least semi-clear slim?
-
"*Upcoming tutorial [Jan 2009]
How to install The Nub without remove the charge & not even popped out"
Could you explain this a little more?
Not looking for the full tutorial, but maybe a little insight on how it was done?
-
Just wanted to make sure
Acidmods did trademark DualNub right?
If not, then its illegal to have the trademark logo because you never paid the trademark fees
If it is trademarked though, no worrys :)
-
Wow, most people here could have done that in 5 minutes no offense.
Have you actually installed one in a slim?
-
"*Upcoming tutorial [Jan 2009]
How to install The Nub without remove the charge & not even popped out"
Could you explain this a little more?
Not looking for the full tutorial, but maybe a little insight on how it was done?
Yes, but
I'm still holiday I'll get it done soon..
Just wanted to make sure
Acidmods did trademark DualNub right?
If not, then its illegal to have the trademark logo because you never paid the trademark fees
If it is trademarked though, no worrys :)
It's obvious Razor X made by AM, everyone should know about it..
Wow, most people here could have done that in 5 minutes no offense.
Have you actually installed one in a slim?
It's on Slim, I've never done this on 1000 family..
-
There are no pictures of the actual install..
-
It's obvious Razor X made by AM, everyone should know about it..
Yeah but still they need to trademark it, otherwise acidmods could even be sued for the little trademark symbol in its name
Trust me, i almost got sued for using the sign in my name just on MSN, people that didnt have anything to do with any type of phenomenal designs got pissed at me
Id advise so acidmods doesnt get into any legal trouble to make it just DualNub or Razor X so acidmods doesnt get taken down
Believe me, lawyers, entrepeuners etc (basically anybody that will have a lot of sueing) will grab any chance to get lots of money, right now this is just like a baby with a sweet, a bigger kid is likely to just snatch it off
-
do u have 2 use the fat psp nub or u can the slim psp nub instead?
-
I got a question so then the other analog will only press the /\, [], O, X buttons? I though it would work as a ps2 control or an xbox controller were the sencond analog is for view movement.
-
Well the 2nd analog replaces those /\, [], O, X buttons and those buttons are typically used for viewing in fps.
-
I got a question so then the other analog will only press the /\, [], O, X buttons? I though it would work as a ps2 control or an xbox controller were the sencond analog is for view movement.
It's updated for better understanding..
-
Hey wow that is amazing but I still don't see how you accomplished this I filed down my AC plug and there is hardly room for the PCP let alone the whole assembly can you uplod those images and some other more detailed one and make thme like full size so we can see them.
-
Well done for actually using some originality and brain-power to solve a problem!
123sample for R&D!
Your image walkthroughs are actually quite nice, now I think about it..
Make a complete one for the whole install, and it will own anything out there!
You get my vote for R&D!
-
Sure, I'll add some details.. :yess:
-
DANM its a tight ass fit.
I've been working on this for about a day so far and I just got all of it to fit inside the PSP slim. The case is bulging a little and I still have to do the wiring, but I'll fix those problems in a few days (damn work getting in the way of things...)
BUT IT CAN BE DONE!
A lot of trial and error to get things to fit, but its not impossible!
-
did you actually do it wondering
DANM its a tight ass fit.
I've been working on this for about a day so far and I just got all of it to fit inside the PSP slim. The case is bulging a little and I still have to do the wiring, but I'll fix those problems in a few days (damn work getting in the way of things...)
BUT IT CAN BE DONE!
A lot of trial and error to get things to fit, but its not impossible!
https://www.acidmods.com/forum/index.php?topic=27449.0 (https://www.acidmods.com/forum/index.php?topic=27449.0)
-
did you actually do it wondering
https://www.acidmods.com/forum/index.php?topic=27449.0 (https://www.acidmods.com/forum/index.php?topic=27449.0)
Yeah, I'll take some pix right now,
its not DONE, so its still a work in progress,
no wires, no spring in the nub and still have to fix a little bulging.
1 sec, stay up 10 more min and I'll have pix of my work in progress.
_________________________________________________________________________________
Pix as promised:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg11.imageshack.us%2Fimg11%2F7008%2Fpicture002ao6.jpg&hash=92ed27151462349e2343089df56812701e2ce07c)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg4.imageshack.us%2Fimg4%2F5797%2Fpicture004if1.jpg&hash=5e946fec5cab56b6e2911aebf980c022e0d9ddab)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg26.imageshack.us%2Fimg26%2F6419%2Fpicture010wd4.jpg&hash=fb6e536c968ad4cceff7aa29ed04c09d35559126)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg26.imageshack.us%2Fimg26%2F1470%2Fpicture006ep6.jpg&hash=65d05a6cb13d562d97233063d2c564b14a6f6f29)
-
Yeah, I'll take some pix right now,
its not DONE, so its still a work in progress,
no wires, no spring in the nub and still have to fix a little bulging.
1 sec, stay up 10 more min and I'll have pix of my work in progress.
kool watch out for the wiring it's a pain
sorta wondering if sample did it
-
Yeah, I'm kinda hesitating a little with the wiring. I can do it, but its just a big problem if I mess up.
I was kinda wondering the same, and trust me the thought did cross my mind a few times.
You can get the width right but I still haven't seem to get the height right, yet. Somehow I need to pull about 2 cm off the top of the to make it fit right.
I think can get the 2 cm from taking more off the bottom of the AC plug and cutting the case a little more but then I would have a 2 cm gap on top.
idk yet, I'm going to think about it some more and maybe 123sample explain a little more clearly.
-
kool watch out for the wiring it's a pain
sorta wondering if sample did it
As you wish, I'll show demo =)
-
nice vid, but do you think you could take some more detailed pix of the nub?
I'm having troubles fitting it all, I got the width, but some how I need to cut about 2 cm off the top to make it all fit.
-
Nice tut good work.. you guys know that you can remove the power charger plug and wire up the USB port for usb charging even when your PSP is off.. you could even mod the charger so that it would have the USB end... This way you have more room in the PSP to work with..
But I like what you have done here real nice!!! :tup:
-
Is there any other place to get the Razor X instead of Coolmods?
-
Is there any other place to get the Razor X instead of Coolmods?
:sadno: :sadno: :sadno:
-
Unless you get one off a member here. Make a post in the auctions section, and somebody may be willing to let go of one. Remember to accept rules though.
-
Unless you get one off a member here. Make a post in the auctions section, and somebody may be willing to let go of one. Remember to accept rules though.
:yess: :yess: :yess:
-
you can also make your own.
-
you can also make your own.
:yess: :yess: :yess:
-
ive got all the parts to do tried uploading tut keep getting error on my computer where do i wire the second nub on motherboard looked under wifi didnt see anything that looked like what is shown in pic can you up load a whole view of motherboard and show exactly where the pins are?? Plz thank you cant wait half way there
-
Hi guys, Is me again. I got the PSP slim and trying to add the second analog. I invested about 5 hours of my life trying to put together the analog with the little loving spring. >=(
Well now the problem is I found the tutorial for the slim, just that how am I gonna solder the cables to the small points in the power board. T_T
Is there any way to install the second analog without removing the AC power jack?
If you have any tips for soldering the razor x please let me know. I would really appreciate.
-
I'm sure that all you have to do for the power jack is just to file it down a little bit as long as you are using the razor X kit. If you're using the razor 1 or 2, then you'll have to relocate the power jack and power board. Be EXTREMELY careful when you try to solder the wires to the motherboard, if you mess up that ZIF connector, your out 80$ to replace it!(entire mobo)
-
Hello.
I have ice silver psp slim.
Can I use slim grey analog ? - like this http://www.dealextreme.com/details.dx/sku.10794 (http://www.dealextreme.com/details.dx/sku.10794)
Can I do it without remove power board or yellow power socket ?
I can crop yellow power socket, analog or something.
Thanks for a reply.
Sorry for my bad English,
-
Hi
I haven't try slim analog yet, here in this tutorial, I'm using 1000 Family analog
Oh yes you can do it, but it takes time to exactly fit in,
but others said it will be easier if you remove yellow power socket, and do USB Charge mod,
so you will have a lot more space to work,
It's actually depends on you, how would you make it, it's all on your own, as long as you know the basic theory above
Looking forward to see it, Sugoi!!! :yess:
-
im still doing this and i want to try getting the power plug to stay there.
also i got question if anyone can answer my nub woobles a lil does that mean i need to put more solder on the razor so it balances the the middle part out?
-
I shoul do this to my PSP slim, but there is just on thing i want to do, while playing monster hunter Portable you use the D-Pad to look around, an the i came up with this electric scheme:
(i know it's crappy but i'll update it making it better)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg207.imageshack.us%2Fimg207%2F1968%2Flolmspaint.png&hash=fff6064e08f950c583d49953f5badeef3c0fb2e1)
i don't know the wiring of the PSP so i also need to know where to put the wires.
-
Yea kinda lost me there bud try redoing that. Ah thats a nice game havent played that in awhile.
-
Ok here's the re edition
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg8.imageshack.us%2Fimg8%2F5299%2Fmyconnectionsformonster.jpg&hash=b52802c6df998c09aadd9881582f905914dbb223)
i hope that this one is cleverer.
the biggest problem with this is that i need to find a switch small enough to fit insidethe case
-
This works in the psp 3000?
-
Much better ardi
-
so the second analog stick does it work as the /\ [] X O buttons ?? or is it separate completely i'm a bit confused on its uses but interested plz give me some details
-
cool ! btw do u know how to make a other color of your power on button?
-
Uhh say that again it didnt come out as clear.
-
Ok here's the re edition
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg8.imageshack.us%2Fimg8%2F5299%2Fmyconnectionsformonster.jpg&hash=b52802c6df998c09aadd9881582f905914dbb223)
i hope that this one is cleverer.
the biggest problem with this is that i need to find a switch small enough to fit insidethe case
Have you found a switch yet? I would liek to do that, to.
-
where i can buy razor x in usa?
-
where i can buy razor x in usa?
Nowhere. Lol.
-
either make your own or you can buy from coolmods
-
ok
what joystick is less slim or fat?
can i use this[url]? (http://dealextreme.com/details.dx/sku.27197)
-
its a phat nub. so the product in your link wil not work
-
How did he keep the analog in place? Did he hot glue it or something to the actual faceplate itself? Please help as ive got everything pulled apart but not sure if he glued it or not... (PSP 1000)
-
Yes most ppl have hot glued there analog nubs and im one of those that have.
-
Hey guys, does this method work inside a 3000?
-
ill never be able to do stuff like that, i couldnt even do the stupid led mod. :cry2:
-
hi, just some question i just got into the modding business for psp lol
does this work for psp-2001?
can you explain the part about tinning the razor-x board?
where do i find the place where i am supposed to soldier the wires on the psp?
and how am i supposed to arrange the wires on the razor-x (where on the board am i supposed to attach them)?
Thanks a lot!! :tup:
-
This works in 1000, 2000, 3000.
First, find the corect xo/\[] points,
Cables are messy if you didnt manage em well,
Crop unecessary parts on psp shell, try fit em and
Arrange whiich one suits you.
Remember dualNub isnt the only mod you can do,
There are plenty more mods to go, and they require
Lots of space in your machine, therefore you should
Arrange spot and cables wisely.
-
can i use slim nubs on dis? pm me please :)
-
yes im pretty sure any nub will work, but try not to bump posts that are getting pretty old.
-
i think its stickied so either way itll be on the first page but k. and thanx for the answer! i was thinking it would be akward to have a phat and slim nub.
-
can you explain the part about tinning the razor-x board?
where do i find the place where i am supposed to soldier the wires on the psp?
What it means to tin the the raxor which is a pcb board specially made for the nub as you can see on the first post. The tinning is simple you just apply solder to the copper part of the razor and thats it. As for the spots to solder it shows it at the bottom just go over it few times or look at other post that apply to this.