Author Topic: Installing DualNub™ Lite'n Easy + Demo (Read 54374 times)

JoblessPunk · « **Reply #30 on:** February 03, 2009, 12:36:57 AM »

DANM its a tight ass fit.
I've been working on this for about a day so far and I just got all of it to fit inside the PSP slim. The case is bulging a little and I still have to do the wiring, but I'll fix those problems in a few days (damn work getting in the way of things...)

BUT IT CAN BE DONE!
A lot of trial and error to get things to fit, but its not impossible!

4dP · « **Reply #31 on:** February 03, 2009, 12:42:41 AM »

did you actually do it wondering

Quote from: JoblessPunk on February 03, 2009, 12:36:57 AM

DANM its a tight ass fit.
I've been working on this for about a day so far and I just got all of it to fit inside the PSP slim. The case is bulging a little and I still have to do the wiring, but I'll fix those problems in a few days (damn work getting in the way of things...)

BUT IT CAN BE DONE!
A lot of trial and error to get things to fit, but its not impossible!

https://www.acidmods.com/forum/index.php?topic=27449.0

JoblessPunk · « **Reply #32 on:** February 03, 2009, 12:59:45 AM »

Quote from: 4dP on February 03, 2009, 12:42:41 AM

did you actually do it wondering

https://www.acidmods.com/forum/index.php?topic=27449.0

Yeah, I'll take some pix right now,
its not DONE, so its still a work in progress,
no wires, no spring in the nub and still have to fix a little bulging.

1 sec, stay up 10 more min and I'll have pix of my work in progress.

_________________________________________________________________________________

Pix as promised:

4dP · « **Reply #33 on:** February 03, 2009, 02:11:06 AM »

Quote from: JoblessPunk on February 03, 2009, 12:59:45 AM

Yeah, I'll take some pix right now,
its not DONE, so its still a work in progress,
no wires, no spring in the nub and still have to fix a little bulging.

1 sec, stay up 10 more min and I'll have pix of my work in progress.

kool watch out for the wiring it's a pain

sorta wondering if sample did it

JoblessPunk · « **Reply #34 on:** February 03, 2009, 02:17:47 AM »

Yeah, I'm kinda hesitating a little with the wiring. I can do it, but its just a big problem if I mess up.

I was kinda wondering the same, and trust me the thought did cross my mind a few times.

You can get the width right but I still haven't seem to get the height right, yet. Somehow I need to pull about 2 cm off the top of the to make it fit right.

I think can get the 2 cm from taking more off the bottom of the AC plug and cutting the case a little more but then I would have a 2 cm gap on top.
idk yet, I'm going to think about it some more and maybe 123sample explain a little more clearly.

123sample · « **Reply #35 on:** February 03, 2009, 04:03:27 AM »

Quote from: 4dP on February 03, 2009, 02:11:06 AM

kool watch out for the wiring it's a pain

sorta wondering if sample did it

As you wish, I'll show demo =)

JoblessPunk · « **Reply #36 on:** February 03, 2009, 11:38:43 AM »

nice vid, but do you think you could take some more detailed pix of the nub?
I'm having troubles fitting it all, I got the width, but some how I need to cut about 2 cm off the top to make it all fit.

l0rdnic0 · « **Reply #37 on:** February 05, 2009, 06:13:22 PM »

Nice tut good work.. you guys know that you can remove the power charger plug and wire up the USB port for usb charging even when your PSP is off.. you could even mod the charger so that it would have the USB end... This way you have more room in the PSP to work with..

But I like what you have done here real nice!!!

Eddy04 · « **Reply #38 on:** February 16, 2009, 11:26:39 PM »

Is there any other place to get the Razor X instead of Coolmods?

123sample · « **Reply #39 on:** February 17, 2009, 04:38:43 AM »

Quote from: Eddy04 on February 16, 2009, 11:26:39 PM

Is there any other place to get the Razor X instead of Coolmods?

bustinthejustin · « **Reply #40 on:** February 17, 2009, 02:43:12 PM »

Unless you get one off a member here. Make a post in the auctions section, and somebody may be willing to let go of one. Remember to accept rules though.

123sample · « **Reply #41 on:** February 17, 2009, 05:31:38 PM »

Quote from: bustinthejustin on February 17, 2009, 02:43:12 PM

Unless you get one off a member here. Make a post in the auctions section, and somebody may be willing to let go of one. Remember to accept rules though.

Tri-edge · « **Reply #42 on:** February 17, 2009, 11:07:20 PM »

you can also make your own.

123sample · « **Reply #43 on:** February 18, 2009, 04:26:38 AM »

Quote from: Tri-edge on February 17, 2009, 11:07:20 PM

you can also make your own.

joshe22587 · « **Reply #44 on:** March 04, 2009, 04:51:48 PM »

ive got all the parts to do tried uploading tut keep getting error on my computer where do i wire the second nub on motherboard looked under wifi didnt see anything that looked like what is shown in pic can you up load a whole view of motherboard and show exactly where the pins are?? Plz thank you cant wait half way there

Eddy04 · « **Reply #45 on:** April 11, 2009, 06:59:58 AM »

Hi guys, Is me again. I got the PSP slim and trying to add the second analog. I invested about 5 hours of my life trying to put together the analog with the little loving spring. >=(
Well now the problem is I found the tutorial for the slim, just that how am I gonna solder the cables to the small points in the power board. T_T
Is there any way to install the second analog without removing the AC power jack?

If you have any tips for soldering the razor x please let me know. I would really appreciate.

kemolagger · « **Reply #46 on:** April 11, 2009, 09:06:33 AM »

I'm sure that all you have to do for the power jack is just to file it down a little bit as long as you are using the razor X kit. If you're using the razor 1 or 2, then you'll have to relocate the power jack and power board. Be EXTREMELY careful when you try to solder the wires to the motherboard, if you mess up that ZIF connector, your out 80$ to replace it!(entire mobo)

marek_g44 · « **Reply #47 on:** April 20, 2009, 11:07:33 AM »

Hello.
I have ice silver psp slim.
Can I use slim grey analog ? - like this http://www.dealextreme.com/details.dx/sku.10794
Can I do it without remove power board or yellow power socket ?
I can crop yellow power socket, analog or something.

Thanks for a reply.
Sorry for my bad English,

123sample · « **Reply #48 on:** April 20, 2009, 11:34:49 AM »

Hi

I haven't try slim analog yet, here in this tutorial, I'm using 1000 Family analog

Oh yes you can do it, but it takes time to exactly fit in,
but others said it will be easier if you remove yellow power socket, and do USB Charge mod,
so you will have a lot more space to work,

It's actually depends on you, how would you make it, it's all on your own, as long as you know the basic theory above

Looking forward to see it, Sugoi!!!

Blazinkaos · « **Reply #49 on:** April 20, 2009, 12:48:13 PM »

im still doing this and i want to try getting the power plug to stay there.
also i got question if anyone can answer my nub woobles a lil does that mean i need to put more solder on the razor so it balances the the middle part out?

Ardi_beltz · « **Reply #50 on:** May 13, 2009, 09:01:33 PM »

I shoul do this to my PSP slim, but there is just on thing i want to do, while playing monster hunter Portable you use the D-Pad to look around, an the i came up with this electric scheme:

(i know it's crappy but i'll update it making it better)

i don't know the wiring of the PSP so i also need to know where to put the wires.

Blazinkaos · « **Reply #51 on:** May 13, 2009, 09:40:00 PM »

Yea kinda lost me there bud try redoing that. Ah thats a nice game havent played that in awhile.

Ardi_beltz · « **Reply #52 on:** May 14, 2009, 07:56:06 AM »

Ok here's the re edition

i hope that this one is cleverer.

the biggest problem with this is that i need to find a switch small enough to fit insidethe case

lucasapoll · « **Reply #53 on:** October 15, 2009, 01:09:28 PM »

This works in the psp 3000?

Blazinkaos · « **Reply #54 on:** October 15, 2009, 08:45:39 PM »

Much better ardi

z_byrd · « **Reply #55 on:** December 04, 2009, 08:06:56 PM »

so the second analog stick does it work as the /\ [] X O buttons ?? or is it separate completely i'm a bit confused on its uses but interested plz give me some details

DragonZero · « **Reply #56 on:** December 09, 2009, 08:29:30 AM »

cool ! btw do u know how to make a other color of your power on button?

Blazinkaos · « **Reply #57 on:** December 09, 2009, 03:30:53 PM »

Uhh say that again it didnt come out as clear.

T4b · « **Reply #58 on:** January 12, 2010, 06:59:58 AM »

Quote from: Ardi_beltz on May 14, 2009, 07:56:06 AM

Ok here's the re edition

i hope that this one is cleverer.

the biggest problem with this is that i need to find a switch small enough to fit insidethe case

Have you found a switch yet? I would liek to do that, to.

yurchik · « **Reply #59 on:** January 23, 2010, 03:26:19 AM »

where i can buy razor x in usa?

News:

Author Topic: Installing DualNub™ Lite'n Easy + Demo (Read 54374 times)