Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PS3 => Topic started by: bncplix on December 26, 2007, 01:13:04 AM
-
My psp is 3.40 OE, it registers fine on my ps3 (just cant use it because it needs to be updated) My brother is at 3.52 M33-4, and it had an error recognizing, i updated it to 3.72 M33 and the same thing. The USB like cant read, though when i try on a pc it reads it right away. Is it possible its the firmware causing this? Or What could be?
-
Firmware most likely, but it may be because AFAIK you can only register one PSP at a time, but this shouldnt give you an error
-
Firmware most likely, but it may be because AFAIK you can only register one PSP at a time, but this shouldnt give you an error
whats AFAIK mean? :o and what firmware do yo you have on your psp to use remote play (if your using at all)
-
whats AFAIK mean? :o and what firmware do yo you have on your psp to use remote play (if your using at all)
As Far As I Know
-
it has to be the latest when the PS3's update came out, so really the latest, at the moment i think 3.72 is needed, but it may be 3.80.
-
it has to be the latest when the PS3's update came out, so really the latest, at the moment i think 3.72 is needed, but it may be 3.80.
I put 3.72 M33 on my brothers and it still couldnt recongnize :/ it cant be a usb problem as it works perfectly on the pc
-
its because you have a ta-082 mobo, to downgrade it had to corrupt key 5 to get onto 1.5 fw without bricking.... fix that key and itlll work.. www.google.com (http://www.google.com)