Acidmods

AcidMods Resources ----- ( These are helpful tools for modding ) => Electronics Projects => Topic started by: SYSTEM aka (Cyberpyrot) on January 22, 2008, 02:07:39 PM

Title: Soldering Wire to SMT
Post by: SYSTEM aka (Cyberpyrot) on January 22, 2008, 02:07:39 PM: Soldering Wire to SMT

Here is low wuality for 56K

Here is High Quiality for broadband

Materials:

1: solder
2: flux paste
3: Soldering Iron (15w for beginners 30 for advanced)
4: 30 AWG wire Kynar
5: SMT Componant

Step 1: Add flux to wire and SMT.

Step 2: Tin wire by adding solder to iron then touching wire to tip of iron.

Step 3: Place wire on SMT then touch iron to wire.
Title: Re: Soldering Wire to SMT
Post by: ra1n on January 23, 2008, 05:52:20 PM: nice tut but whats the song?
Title: Re: Soldering Wire to SMT
Post by: 4dP on January 23, 2008, 06:31:30 PM: Quote from: RA1N on January 23, 2008, 05:52:20 PM
nice tut but whats the song?

Gorillaz - Feel Good Inc.
Title: Re: Soldering Wire to SMT
Post by: robin1989 on January 26, 2008, 04:43:43 PM: hey

check out our high quality video tutorial section at http://www.vimeo.com/acidmodstutorial (http://www.vimeo.com/acidmodstutorial)
Title: Re: Soldering Wire to SMT
Post by: greendragonslim on January 28, 2008, 04:11:43 PM: Hey, I haven't done any soldering what so ever and was wondering if adding leds was an easy mod for begginers? I'm pretty good with my hands? What materials would I need and could I just get like everything on ebay?
Title: Re: Soldering Wire to SMT
Post by: 4dP on January 28, 2008, 10:34:13 PM: Quote from: greendragonslim on January 28, 2008, 04:11:43 PM
Hey, I haven't done any soldering what so ever and was wondering if adding leds was an easy mod for begginers? I'm pretty good with my hands? What materials would I need and could I just get like everything on ebay?

like in vid he is using helping hands to hold the led and solder to it but using tweezers works aswell the materials as i said in the other thread can be found at any electronics like radioshack
Title: Re: Soldering Wire to SMT
Post by: King Wolf 15 on February 08, 2008, 10:59:36 PM: Nice tutorial...
Title: Re: Soldering Wire to SMT
Post by: cwn723 on February 18, 2008, 04:47:00 PM: nice, simply tut
Title: Re: Soldering Wire to SMT
Post by: Vampyra_Rayne on May 05, 2008, 12:12:56 AM: there's alot of tutorials here...but if i wana start soldering the leds n all...from a scratch like me...i dun understand at all...O.o

i cannot understand at all...so i cud not evn start on wat to start with or how...plz help me out ppl here...u guys are good
Title: Re: Soldering Wire to SMT
Post by: P3nnyw1se on May 05, 2008, 12:51:46 AM: Quote from: Vampyra_Rayne on May 05, 2008, 12:12:56 AM
there's alot of tutorials here...but if i wana start soldering the leds n all...from a scratch like me...i dun understand at all...O.o

i cannot understand at all...so i cud not evn start on wat to start with or how...plz help me out ppl here...u guys are good

Practice your soldering on some old PCB board you have lying around or an ancient graphics card or something that no one will use...soldering on tiny points becomes easier with practice =D
Good Luck!
Title: Re: Soldering Wire to SMT
Post by: gayazz on October 21, 2008, 09:20:43 AM: how do i know which side is negative and which side is negative on the led.
Title: Re: Soldering Wire to SMT
Post by: SN!P3R on October 21, 2008, 12:09:24 PM: if you look at the led's bottom, you can see a green "arrow". the negative side is the side which the point of the arrow points at
Title: Re: Soldering Wire to SMT
Post by: soldering iron on November 21, 2010, 07:48:49 PM: There are soldering guide and some reviews of soldering iron at website:
http://www.soldering-store.com/ (http://www.soldering-store.com/)