Soldering Wire to SMT

[SYSTEM aka (Cyberpyrot)]

Soldering Wire to SMT

Here is low wuality for 56K

Here is High Quiality for broadband

Materials:

1: solder
2: flux paste
3: Soldering Iron (15w for beginners 30 for advanced)
4: 30 AWG wire Kynar
5: SMT Componant


Step 1: Add flux to wire and SMT.

Step 2: Tin wire by adding solder to iron then touching wire to tip of iron.

Step 3: Place wire on SMT then touch iron to wire.

[ra1n]

nice tut but whats the song?

[4dP]

nice tut but whats the song?

Gorillaz - Feel Good Inc.

[robin1989]

hey


check out our high quality video tutorial section at http://www.vimeo.com/acidmodstutorial

[greendragonslim]

Hey, I haven't done any soldering what so ever and was wondering if adding leds was an easy mod for begginers? I'm pretty good with my hands? What materials would I need and could I just get like everything on ebay?

[4dP]

Hey, I haven't done any soldering what so ever and was wondering if adding leds was an easy mod for begginers? I'm pretty good with my hands? What materials would I need and could I just get like everything on ebay?

like in vid he is using helping hands to hold the led and solder to it but using tweezers works aswell the materials as i said in the other thread can be found at any electronics like radioshack

[King Wolf 15]

Nice tutorial...

[cwn723]

nice, simply tut

[Vampyra_Rayne]

there's alot of tutorials here...but if i wana start soldering the leds n all...from a scratch like me...i dun understand at all...O.o

i cannot understand at all...so i cud not evn start on wat to start with or how...plz help me out ppl here...u guys are good

[P3nnyw1se]

there's alot of tutorials here...but if i wana start soldering the leds n all...from a scratch like me...i dun understand at all...O.o

i cannot understand at all...so i cud not evn start on wat to start with or how...plz help me out ppl here...u guys are good

Practice your soldering on some old PCB board you have lying around or an ancient graphics card or something that no one will use...soldering on tiny points becomes easier with practice =D 
Good Luck!

[gayazz]

how do i know which side is negative and which side is negative on the led.

[SN!P3R]

if you look at the led's bottom, you can see a green "arrow". the negative side is the side which the point of the arrow points at

[soldering iron]

There are soldering guide and some reviews of soldering iron at website:
http://www.soldering-store.com/