Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: jXc on February 03, 2008, 01:02:07 PM
-
Ok so I was looking at my powerboard about to do the trigger mod having no experience I tried to do the led power on and power off led and it was a success in the pic its not finished but how would I do it if it looked like this
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi31.tinypic.com%2F2rgib11.jpg&hash=45196170d398bb42b03b8ba296390a4bfc9e801b)
Btw did I do I good job being the first time I ever soldered?
-
pretty good...i guess since it is ur first time.... :tup:
:
-
If its solder on right im guessing the led turns on only when charging right
-
If its solder on right im guessing the led turns on only when charging right
Correct but the thing is I want to do the trigger mod and i looked at the tuts i can find and there all a different power board could someone point me in the right direction of where i could find the right way to do the trigger mod
btw I just cant afford kynar wire atm can I use any type of wire to connect the to leds so I can get the power led to turn on too
-
if you go to radioshack, you can get 30 awg wire for $3.99 which has 50 feet. The best wire would be 30 awg kynar because it is very thin.
-
if u want 2 use that same Led as your power on Led just connect the other negative contact u see how theres three without a led the top 2 are negtive join them together and it should work for both charge and on and if u want a brighter led bridge the resistor the 2 little black ones