Help with Psp power board

[jXc]

Ok so I was looking at my powerboard about to do the trigger mod having no experience I tried to do the led power on and power off led and it was a success in the pic its not finished but how would I do it if it looked like this


Btw did I do I good job being the first time I ever soldered?

[redryno1221]

pretty good...i guess since it is ur first time....
:

[Azie139]

If its solder on right im guessing the  led turns on only when charging right

[jXc]

If its solder on right im guessing the  led turns on only when charging right

Correct but the thing is I want to do the trigger mod and i looked at the tuts i can find and there all a different power board could someone point me in the right direction of where i could find the right way to do the trigger mod

btw I just cant afford kynar wire atm can I use any type of wire to connect the to leds so I can get the power led to turn on too

[psp339]

if you go to radioshack, you can get 30 awg wire for $3.99 which has 50 feet. The best wire would be 30 awg kynar because it is very thin.

[Azie139]

if u want 2 use that same Led as your power on Led just connect the other negative contact u see how theres three without a led the top 2 are negtive join them together and it should work for both charge and on and if u want a brighter led bridge the resistor the 2 little black ones