Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: vgamer360 on March 20, 2008, 01:26:19 PM
-
Hey, I was just wondering before I install this. I am putting on a PSP R-Key Cable ribbon and I was wondering if i take this stuff on the edges off cause it is not on my old cable and I don't know if it is some kind of rubber contact or something.
It's only on one side of it. And can i use a screwdriver to take it off or will that damage the cable?
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi118.photobucket.com%2Falbums%2Fo110%2Fkniewia%2F102_1732.jpg&hash=f10f00e89096cb1840d116cb0f05661d00ce10e0)
-
i think those are clear protective covers so i think your good to take them off. listen to me if you want but im not sure
-
Unless there is a plastic film over the plastic connectors do not take the Hard plastic things off!
-
i wouldn't think so leave them on and see if it works if it doesn't you can always take them off, whereas if you took them off and it didn't work then you cant put them back on
-
Well I ended up taking them off, the reason be is that they were off set on the ribbon and I had to place them on correctly or it would not plug in. It works now and my PSP led's are back on. :tup:
-
Well I ended up taking them off, the reason be is that they were off set on the ribbon and I had to place them on correctly or it would not plug in. It works now and my PSP led's are back on. :tup:
man u must have been :censored: ing yourself when you were taking those off. i would have been :tup:
-
man u must have been :censored: ing yourself when you were taking those off. i would have been :tup:
lol i wouldn t care i got a spare :tup: