Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => Nintendo DS => DS Lite => Topic started by: The Compiler on July 31, 2008, 08:25:12 PM

Title: Strange power issues - Power LED turns on, nothing happens
Post by: The Compiler on July 31, 2008, 08:25:12 PM
Hi there,

now I've got another big problem: I wanted to install a PVU into my DS. Now, after BT+ and a ground is connected, there's a really strange issue: If I boot the DS, the Green power LED lights up and stays. The DS doesn't turn off. But the only thing I get is this freaky LED, nothing else. My R6 access led does light up for a part of a second, so it gets power. But no screen is responsing, and even if I disconnect the upper screen, the LED lights up but nothing else happens. It doesn't turn off as it should when the screen is disconnected.
Before we connected + and - of the PVU to BT+ and a ground on the board, everything worked.

If I should measure any points, no problem, there's a Oscilloscope and two multimeters here.

Anyone an idea what could be the issue?
Thanks for any help!

Florian  :beg:

EDIT: I forgot to put the Wifi-module back to its place, now it works. Was that really an issue with that?  :tup:
Title: Re: Strange power issues - Power LED turns on, nothing happens
Post by: rocky on August 05, 2008, 10:33:05 PM
EDIT: I forgot to put the Wifi-module back to its place, now it works. Was that really an issue with that?  :tup:

Yes the reason you need that chip is because it also stores the bios firmware information.  Without the chip it will not boot.
SimplePortal 2.3.5 © 2008-2012, SimplePortal