Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: dmkmarlonsparda13 on August 10, 2008, 12:43:56 PM
-
im new to psp hardware modding. i saw that alot of people have put leds in their psps and i want to do it 2. the only thing is that i want the leds to go on when the hold switch is on but i cant seem to find any good tutorials on it.
if anyone cud help i would rellly appreciate it
-
OMG
SEARCH!
-
http://www.youtube.com/watch?v=0Nt3jNnDqKw (http://www.youtube.com/watch?v=0Nt3jNnDqKw)
Ok.
The Hold Switch Part mush be cut and then the last leg on the switch is ground.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi34.tinypic.com%2F35iy8vm.jpg&hash=096db724d2f894f39ce2ef28353056846cfa0ad3)
You will need 2 SMD Leds usually 603
Can be found on Ebay
Also needed-
15-20 Watt Soldering Iron
30 AWG Kynar Wire
Rosin Core Solder
Rosoin Flux
Most found at Radioshack.
And yes Proper i agreee but i feel like being nice today lol
-
lol sorry and thanx :hifive:
-
would a 30W soldering iron be too high? That's all I have now and I think it should be ok as long as you don't hold it on too long. I thought I'd ask the ones who have done it bfore.
-
I use 60 watt!
-
I use a 30 too.
The only thing is the higher the wattage the faster it can ruin stuff. So if you think you are good at soldering its fine.
-
does this way require any resisters?
-
yesh any leds Except Blue, White and UV (when using 3V) need Resistors
-
yesh any leds Except Blue, White and UV (when using 3V) need Resistors
ok thanks my blue leds ill be ok then ;)
-
yesh any leds Except Blue, White and UV (when using 3V) need Resistors
You learned well, you learned well... LOL
But ya.
-
Hold dont work after this?^^
-bryan
-
Hold dont work after this?^^
-bryan
Dont Bump Old Topics.
And Yes. It is disabled.