Acidmods
AcidMods Resources ----- ( These are helpful tools for modding ) => Electronics Projects => Topic started by: Tri-edge on October 28, 2008, 08:04:11 PM
-
Hey guys I've been having this idea lately but I've never bothered to post it so here it is. I was think because it's so hard to do the razor mod on the psp slim because you have to do three things:
1. have to rewire power switch
2. You have to trim get rid of the axby board
3. You have to solder to solder the fpc connector
I was thinking that maybe we can design a pcb that solves all three problems at once. We would have the razor x attached to a board with the axby buttons and switches in place already. And it would have the ribbon cable leading the fpc where the original cable plugged into. So it's just basically just swap out the parts and put on a faceplate with a pre-drilled hole.
-
well first of all the difficult part would be fitting it inside the 2k/3k
second, are you going for thesame type of powerboard for the phat? so the x o etc.. are on a pcb and not on a ribbon cable? if so it would be twice as thick.
-
Many others have also thought of this.
Very hard.
-
well first of all the difficult part would be fitting it inside the 2k/3k
second, are you going for thesame type of powerboard for the phat? so the x o etc.. are on a pcb and not on a ribbon cable? if so it would be twice as thick.
No not like that. It would be the proper shape that it would need to be so it can fit.
It would look simiar to this:
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww1.dealextreme.com%2Fproductimages%2Fsku_11477_1.jpg&hash=386a4f6c8a76235809fefcd5ce085aef92ad43a7)
with a switch and the razor x attached.
The razor x would have the traces to the axby buttons and the buttons would have the traces to the fpc slot so there's not soldering involved. Same story with the power connector.
Many others have also thought of this.
Very hard.
dang, because I thought I would be easy because we know where the axby buttons are on the fpc connector
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.beardmods.com%2Facidmods%2Ftuts%2Fpsp%2FPSP%2520slim%2520pinout%2520by%2520TIMMYDX%2FFacebuttonscopy.png&hash=af6cedfafcb471bd7e8cc35ce7343b780b61c1ec)
-
Yeah, but finding them on the connector takes 10 seconds.
IT would have to be manufactured on insanely thin circuit board, and would have to be milled (I have a cnc haha) or fabbed.
I dont think the razor X will fit.
Hard
-
Dang. Oh well then I thought it was worth mentioning.
-
i think that if it can be done, it will be awesome!. :clap:
-
i think that can definitely work it would take a while and be a real big pain getting it the exact size bu defiantly possible
-
could this be done on the phat?
i mean remake the phats power board so it had the nub on it
-
Thet would be possiable to but harder becasue the board is double sided and if this is going to be homemade it sorta hard to made double sided boards at home
-
ain't there a printer that makes boards like this.
-
ain't there a printer that makes boards like this.
In a way, you are referring to a way of making them.
But you cant just open up a text document, type "PSP Slim ABXY Redesign" and click print..
-
In a way, you are referring to a way of making them.
But you cant just open up a text document, type "PSP Slim ABXY Redesign" and click print..
Of coase not like that but in a way thats kinda what you do . There a type of PCB board printer and prints the solder traces and shi- I seen one in action printing out begel boards ALOT of them forgot whats its called but im sure it works the same way as an ink jet printer.
-
Of coase not like that but in a way thats kinda what you do . There a type of PCB board printer and prints the solder traces and shi- I seen one in action printing out begel boards ALOT of them forgot whats its called but im sure it works the same way as an ink jet printer.
Yes, I know the exact method you are talking about. You need a Laser printer.
But in no way is that what you do..This topic is about the Design of the PCB, this is before that stage.
-
well alien can you design it?
-
i would love to see that done alien
-
if this was made it would open up the slim and the 3000 to proper FPS gaming. the razor-x for the Phat was a brilliant idea and has intreseted modders everywhere. A slim version would be more than welcome. :)
-
it would be sweet if the phat powerboard is remade so the nub is on it.
SOME ONE DESIGN THE BOARD LOL :beg:
-
I didn't say to remake the phat powerboard...
-
I didn't say to remake the phat powerboard...
but i did lol :taunt: do it for both
-
I could try on the phat, once i get time. I would like to have one for myself anyway.
-
Good luck.
Make sure your caliper is working!
Also, on the freeware of eagle you can't place zif pads on the bottom layer, and you will have to make your own footprints (No I won't give you mine Heha)
-
Good luck.
Make sure your caliper is working!
Also, on the freeware of eagle you can't place zif pads on the bottom layer, and you will have to make your own footprints (No I won't give you mine Heha)
lol
-
harder on the phat I think, because the X[]O/\ have to be made on board plus there is that friken zif connector on the bottom.