Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Phat (1000) => Topic started by: alentris on January 18, 2009, 01:51:38 PM
-
I've got a quick question on a mod I'm going to do. For the Direct contact LED mod for the phat, How much resistance would I need with blue 0603 leds? Thanks for any help :tup:
-
By direct contact, I'm guessing your trying to make them sound reactive....for that you don't need any resistance but if you want them turned on all the time, you'll need a 10R resistor.
To help you out in the future this is the equation you use to work out the resistance:
V = I x R
V=Volts
I=Current
R=Resistance
Hope this helps
Max
-
That would be easy, If I knew the amperes... :confused:
-
What are you exactly trying to do ?
-
What are you exactly trying to do ?
Direct contact sound reactive trigger leds and ROL, 1 in each trigger and 4 total in the UMD door. All controlled by a dip switch in the side trim. Blue color all around for all of the LEDS.
-
Yeah you don't need any resistors...Just solder em on. Can't wait to see the pics!
Good luck :tup:
Max
-
Yeah you don't need any resistors...Just solder em on. Can't wait to see the pics!
Good luck :tup:
Max
Yeah, I need to save a little more, my lcd got fried during a power surge, so I had to buy a new one :( (also, I'm sure It isn't the backlight fuse, because it's only part of the screen that's gone black.
-
Bummer, I would of done the mod first and then bought the LCD :P lol
-
Bummer, I would of done the mod first and then bought the LCD :P lol
I would have too, normally, but there's a long story behind this one...
-
Sorry, I've been away for the weekend....
Let me guess your parents went ape sh*t at you for breaking it and your trying to fix it as quickly as possible to prove all is well ? I've been in a few situations like that with my computer XD
now we're off topic lol
Good luck hope, to see some pictures soon :tup:
Max