Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: Ben. on June 09, 2010, 02:00:13 PM
-
Newest Custom Controller. Fitted with a Raven.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg121.imageshack.us%2Fimg121%2F4392%2Fcimg1199w.jpg&hash=65d6fb2065dc7e041199756d8bd477723eb1d7d6)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg809.imageshack.us%2Fimg809%2F1327%2Fcimg1205.jpg&hash=496581382abcf71d5bb1283af0bf68385ec2440b)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg715.imageshack.us%2Fimg715%2F6349%2Fcimg1203y.jpg&hash=00ea5cee581e464b242a60fc83e4ececf6584304)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg69.imageshack.us%2Fimg69%2F2893%2Fcimg1202z.jpg&hash=e7444430f57d09a4ece31254d7ee762e2bf37d39)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg37.imageshack.us%2Fimg37%2F1594%2Fcimg1200n.jpg&hash=41a3d4671c25cdd9ab8601ecafa1282dab16e153)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fimg571.imageshack.us%2Fimg571%2F4143%2Fcimg1204k.jpg&hash=fe43347cc56352aef6c9d0d393a057954a1f10fa)
-
thats shexy!
Why did they not include a chrome battery compartment?
Where did you put your programming port?
-
Well It was a full chrome shell, but I don't like the feel of the chrome on the back so used a standard MS black back. The battery compartment is a silver rather than a chrome and I have no idea why! haaa
I modded the PnC port rather than adding a 3.5mm programming port :)
-
very sexy. i must say i do like crome
-
That is really sick, nicely done the joysticks are extremely nice so do you have to use a diffrent type of cord for this? Im not sure which port you mean.
-
That is really sick, nicely done the joysticks are extremely nice so do you have to use a diffrent type of cord for this? Im not sure which port you mean.
PnC - Play 'n' Charge
So you can just use your play n charge cable to plug it into your PC and change presets/drivers..
-
Are the analog sticks rubbery or hard plastic?
I would like to know where you got those thumbsticks.
-
Are the analog sticks rubbery or hard plastic?
I would like to know where you got those thumbsticks.
They are rubbery. It's the new XCM case, come's with light up, clear thumbsticks..
-
Dang dude, that's nice!
I want to install a viking mod on my controller, but I'm not sure how to "expose the trace" How the :censored: did u do that???
-
You can scrape the trace with a xacto knife, then you apply a little amount of flux and you are ready to solder your wires :)
-
what exactly does flux do?
-
Hey Ben! Nice controller, not too sure about the tablecloth though!!
Flux helps the solder flow. You can get solder with a flux core, and you can also flux the areas you want to solder so the solder flows onto (and into) them more easily. Basically it reduces the surface tension of the solder making it behave more like a fluid. It does other things but that's the important one.
-
nice controller, do you sell these?
-
Hey Ben! Nice controller, not too sure about the tablecloth though!!
You try telling the mother that!
nice controller, do you sell these?
Yeah I do..
-
klkl just wondering how much you charge?
-
I sold that one within a day for £124.99
-
Yea the tablecloth just completely ruins the background lol.
-
Yea the tablecloth just completely ruins the background lol.
Well I like it so :P
-
Ben is cg or cg1 ezier for the install?
-
I prefer CG2 but I have done well over 100+ Viking Controllers mostly on CG2
-
kk is viking chip easy to install?
-
Nope :L
Takes me over an hour still. 20 Wires is a tight squeeze..
-
lol where can i purchase the diy kit?
-
From my site, which I'm not allowed to post :(
Send me an email here: ben@rapidcontrollers.co.uk ;D
-
Ben arent alot of the via points/ traces next to the black chip on the back?
-
kk, i dnt wanna buy one at the moment but how much do they cost?
-
hmm, not really, most the points are on the front of the board and the chip is stuck to the back :/
Post Merge: June 23, 2010, 02:57:24 PM
£34.99 with a free set of LEDs.
-
klkl not bad, will i be able to choose what type i want e.g tyrs hand , thors hammer etc ?
-
It's all on chip, just depends how you want to set it up..
You need to know what kind of controller you have first so go HERE! (http://www.viking360.com/forums/viewtopic.php?f=22&t=1161)
CG2 Download Links
Duo/Raven - Click Here! (http://www.viking360.com/downloads/Wireless%20CG2%20Duo%20Install%20Instructions%2010.18.2009.rar)
Sleeper/Hammer - Click Here! (http://www.viking360.com/downloads/Wireless%20CG2%20Sleeper%20Install%20Instructions%2010.18.2009.rar)
Tyr's Hand - PM Me.
CG Download Links
Both Raven & Hammer - Click Here! (http://www.viking360.com/downloads/CG%20Install%20Instructions%209-18-2009.rar)
Matrix Links
Tyr's Hand - Click Here! (http://www.viking360.com/downloads/Wireless%20Matrix%20Install%20Instructions%2010.18.2009.rar)
-
thanks ill check that out!
-
Ben points N,L, and K, those r right next to the chip on the back, do u solder to those or is there another point u can use instead of that?
-
I didn't like soldering them to the points next to the chip, I got too many problems so I found some alternative points on the top of the board :)
-
i looked at what you have on your site, but just wondering when your ebay listings are goin back up?
And also happy birthday!!
-
Why thank you ;)
They will be up in the next couple of weeks or so :)
-
thats ok, and will have what you usually have listed?
And what about the mw2 prestige service?
-
Yarpp :)
-
??
Post Merge: June 24, 2010, 12:48:57 PM
just noticed aswell, that we both live in north devon lol
-
Ben do u hav a picture of the points u use instead of those?
-
Where do you live TS? I'm in Littleham, a little village near Bideford.
and I have a picture somewhere, check out the Viking360 forums, there are pics up there and shizzle ;)
-
k is it one of ur forums, cause i was lookin over there and coudlnt find it.
-
I'm not sure, what exact points do you want to know? and I will draw them on a scan of a CG2 board ;)
-
me i live in ilfracombe which is near bideford lol
-
You've ordered from me before haven't you, I have posted some orders to Ilfracombe ;)
-
yes you did me a rapid fire controller service n iv done your mw2 service three times lol
-
Yeah I remember that ;)
Maybe you could do a review of my shop on the forum, I think there is a area for that?
-
ok what on here?
-
Ben points N,L,E,and K, and the D+ and the D- ones, dont hav to draw those out but are those mandatory points or only if u do pnc?
-
D+ and D- are needed for you to program the chip, which you need to do once it is installed as it has no preset loaded onto it before installation. You need them to go either to a 3.5mm Jack or to the Pnc port.
Is this for a Duo or Raven?
-
where am i able to do that?
-
U mean sleeper or raven lol and this is for raven
-
Here I think: https://www.acidmods.com/forum/index.php/board,405.0.html (https://www.acidmods.com/forum/index.php/board,405.0.html)
U mean sleeper or raven lol and this is for raven
That is what I mean ;) haa. Ok I'll do it now :)
-
your shops not there?
-
Add a new topic ;)
And heres the diagram, its bad I know but you should be able to spot the points.
The K & L are the bottom of each LED.
Pic attached.
Credit to RDC for the pic.
-
is it alryt to use your site in the review?
-
Of coursee :)
-
Ben howcome the guide has l and k right next to the chip and not on the leds, thats wierd cuz i would hav thought it would have shown it to be on the leds in the beginning, and if i wired something rong the first time is there a possibility the chip is fried, like hav u wired something worong b4?
-
Well Einar (Guy who runs Viking360) decided to do the pinout like that, the points I have shown you there are 100% fine to use :)
-
Yea ik, do they hav to be on the bottom of the led, and if i wired something wrong, would the chip fry?
-
It wouldn't fry, the bottom of the LED is the positive side, and that's the side it needs to be on to supply power through the LED, it will just not work on if you wired it to the top.
-
Thanks ben, how would the chip fry is there anyway
-
I have no idea, if there are any problems with it send it back to me and I'll take a look etc.. :)
-
are you going to be doing anymore prestige services?
-
Yarpp - got my jtag sitting right here, just need some time to sort it out :/
-
kk do u go by euros or pound and howlong does it take to ship from the u.s. to britain, and whats the cost
-
lol will you be doin lobbies or system link?
-
Well I'm in the UK and I work in pounds. Shipping to the US is £5 more.
Probably both, System link first though :)
-
klkl will the pricing be the same?
-
yeah £10 for system link £15 for lobby etcc..
-
kk hit me up with a pm when your doing it.