Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => PSP's => PSP Slim (2000) => Topic started by: dean95 on August 23, 2010, 02:56:09 AM
-
Can I connect the led directly to speakers for to get rhythmic leds??
How solder the led's feet to wires??
Scuse me for bad english..
-
you can but it's not as good as using a chip like the pulsevu
To solder the LEDs first tip the wires, melt a bit of solder on to them then hold it to the led and warm it up so it tacks ont to the LED
-
thanks for the answer.But if want to use the wifi's switch,how to do I ?
-
Here you go:
Don't take the Wifi Switch for this, or desoldering all the switch make a bridge on the mobo pin for always ON Wifi, and glu backwards the wifi Switch, after this operation you can use the Wifi Switch for your Diagrams.
If you don't make this the wifi Switch give you a general Ground , and it's not good for that you want to do.
If you don't understand I take Pic after Work.
(Sorry I'm French and I have some difficult to speak a good english)
Post Merge: April 26, 2010, 05:17:11 AM
Here the MOD you must do to use the Wifi Switch for your diagrams:
desoldering the switch
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fwifiplus%2F1001.jpg&hash=b40c38547164bd9a73baa24cd9a30cfdb606e425)
Solder a bridge between the two PIN closest (for Always activate Wifi)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fwifiplus%2F1002.jpg&hash=ae6543acf8e94f4c082aa73857feccaadaf987e5)
Solder two Wire on the Switch
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fwifiplus%2F1003.jpg&hash=fdd625f6c26d21567a0d3e45cff65d635dbf888e)
And glue the Switch like this
Be carefull the switch pin and the bridge should not touch.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Farioch76.free.fr%2Fwifiplus%2F1004.jpg&hash=a79688be8f04cfc9b4cb9beef59b7041c0cc42f6)