Acidmods

Console Modding------ ( Here you can talk about your favorite Consoles ) => XBOX 360 => 360 Controllers / 360 Rapid Fire Controllers => Topic started by: snowcolt17 on July 15, 2011, 08:53:43 PM

Title: can this be fixed
Post by: snowcolt17 on July 15, 2011, 08:53:43 PM: some idiot tried to i guess have sex with it
Title: Re: can this be fixed
Post by: crazy-modder on July 15, 2011, 08:55:16 PM: Ive had that problem countless times. Just follow the trace all the way to a solder point "hole" and solder a piece of 30awg wire from the pin to the solder point
Title: Re: can this be fixed
Post by: snowcolt17 on July 15, 2011, 08:57:18 PM: ok thanks crazy
Title: Re: can this be fixed
Post by: Rodent on July 15, 2011, 08:57:40 PM: LOL you just answered for me , lol was going to tell him the same thing....lol :hifive:
Title: Re: can this be fixed
Post by: snowcolt17 on July 15, 2011, 10:07:22 PM: here are some pics after it is cleaned a little more
Title: Re: can this be fixed
Post by: Rodent on July 15, 2011, 10:20:20 PM: what kind of board is it ? so i can find you the traces
Title: Re: can this be fixed
Post by: snowcolt17 on July 15, 2011, 10:28:57 PM: its a cg

(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fi50.photobucket.com%2Falbums%2Ff320%2FRDCXBG%2FRepair%2FWirelessCGTopClean.jpg&hash=1d2061c73e8a113156d2157ffc834758b7c64ff6)
Title: Re: can this be fixed
Post by: Rodent on July 15, 2011, 10:32:15 PM: https://www.acidmods.com/forum/index.php/topic,34544.0.html
Title: Re: can this be fixed
Post by: 1TONpete on July 16, 2011, 05:12:56 AM: The middle leg is the important one, the outer pins are vcc and ground. All you need to do is run a lead from the other stick or another ground or vcc point, as I don't remember which is which, but that info is onsite somewhere.
Title: Re: can this be fixed
Post by: snowcolt17 on August 10, 2011, 06:42:35 PM: i havent tried to do a repair yet on it. but when it is tight and not moving it doesnt shoot. pretty has something to do with the middle pin.. but when i mash start and go back it shoots?
Title: Re: can this be fixed
Post by: rafaliyo86 on August 10, 2011, 11:14:08 PM: Quote from: 1TONpete on July 16, 2011, 05:12:56 AM
The middle leg is the important one, the outer pins are vcc and ground. All you need to do is run a lead from the other stick or another ground or vcc point, as I don't remember which is which, but that info is onsite somewhere.

yes, 1tonpete is right. I fixed two controller with this problem. The upper point is analog voltage (TP8) and the lower is ground (TP2 or TP22)

Hope this help
Title: Re: can this be fixed
Post by: snowcolt17 on August 11, 2011, 09:25:56 AM: thanks. i will try it to do.. just run it to the other side point on the left triggger? both or just ground?