Acidmods
Console Modding------ ( Here you can talk about your favorite Consoles ) => Legacy Consoles => Xbox => Topic started by: 3D0kassiah on July 12, 2013, 04:58:37 PM
-
ok guys well i tried the new hotswap method to softmod this xbox
i used xboxhdm and ndure 3.1
i made the files with ndure etc i did a successful hotswap etc i ran the ndure script backed up my c: then ran the script to install ndure for unleashx i think
well it gave me an error while installing ndure no biggie i restored my c: etc xbox booted fine
so i did it again(biggest mistake ever) gave me the same error etc so once again i restored my c: using ndure as before
but once i tried to boot the xbox i get an error 16 after some research it means the c: was corrupt
i tried to rebuild using slayers evox disk with stock c: files using hddmaker i rebuilt the c: using those stock c: files from the disc still kicking error 16
am i totally screwed ?
-
Told you to do more research before you went any futher... :confused: :fear: :nono:
-
Told you to do more research before you went any futher... :confused: :fear: :nono:
the software i used didnt output certain files thats why it half installed no biggie ima gonna build a eeprom reader and try n fix it
-
the software i used didnt output certain files thats why it half installed no biggie ima gonna build a eeprom reader and try n fix it
if you would of listened and dd what i mentioned to you, you would of been fine ....lol if you need help building a eeprom reader let me know .
here to help you out i got this from llamma.com worked great for me when i built mine.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.llamma.com%2Fxbox%2FRepairs%2FReading_Xbox_Hdd_key_files%2Fimage006.jpg&hash=4da870bf2c0820dcd28bbb4944f8295c91c4bb49)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.llamma.com%2Fxbox%2FRepairs%2FImages%2FPCB2_small.GIF&hash=b16d03cbb8547d7cb15a73a0684e4047c3e5e37c)
I do not like sending members to other sites , but this is very easy and self explanatory if i had time i make a tutorial for Acidmods with little better pics
http://www.llamma.com/xbox/Repairs/Reading_Xbox_Hdd_key.htm (http://www.llamma.com/xbox/Repairs/Reading_Xbox_Hdd_key.htm)
-
if you would of listened and dd what i mentioned to you, you would of been fine ....lol if you need help building a eeprom reader let me know .
here to help you out i got this from llamma.com worked great for me when i built mine.
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.llamma.com%2Fxbox%2FRepairs%2FReading_Xbox_Hdd_key_files%2Fimage006.jpg&hash=4da870bf2c0820dcd28bbb4944f8295c91c4bb49)
(https://acidmods.com/forum/proxy.php?request=http%3A%2F%2Fwww.llamma.com%2Fxbox%2FRepairs%2FImages%2FPCB2_small.GIF&hash=b16d03cbb8547d7cb15a73a0684e4047c3e5e37c)
I do not like sending members to other sites , but this is very easy and self explanatory if i had time i make a tutorial for Acidmods with little better pics
http://www.llamma.com/xbox/Repairs/Reading_Xbox_Hdd_key.htm (http://www.llamma.com/xbox/Repairs/Reading_Xbox_Hdd_key.htm)
thanks will see if i have time today to guy buy the parts and the shak and yes i did listen to you and read things over and over again but the software i was using wasnt out putting certain files thats why i had half a mod etc
bad day i guess but will get this up and running
-
thanks will see if i have time today to guy buy the parts and the shak and yes i did listen to you and read things over and over again but the software i was using wasnt out putting certain files thats why i had half a mod etc
bad day i guess but will get this up and running
Idk understand what files you were trying to load? you should of been able to install mem card for controller also i think when i did mine I made a usb cable to hold a flash drive i will have to check then just loaded the files i needed for the softmod, its been years since i did this. and using splinter cell i had to create a profile for linux i believe. damn so long ago i forgot ....lol
-
Idk understand what files you were trying to load? you should of been able to install mem card for controller also i think when i did mine I made a usb cable to hold a flash drive i will have to check then just loaded the files i needed for the softmod, its been years since i did this. and using splinter cell i had to create a profile for linux i believe. damn so long ago i forgot ....lol
if you can be a bud and see what files you got inside the c: im trying to see if i can rebuild my hd
or does anyone have a back up of there c: off the xbox?
-
if you can be a bud and see what files you got inside the c: im trying to see if i can rebuild my hd
or does anyone have a back up of there c: off the xbox?
I might have but idk if it will work i used hdd maker
-
I have the xbox files from C : back up on my server
let me zip it and I link you
-
I have the xbox files from C : back up on my server
let me zip it and I link you
thank you mike