Total Members: 
Preorder Link : https://acidmods.com/shop/product_info.php?products_id=154
We are official resellers for the much anticipated Minimus AVR USB Development Board !
We have tested this and it works prefectly. It is very easy to program and can be updated at any time without fuss. Unlike other poorly designed AVR Kits, all the IO's are accessible, there are power and status LED's and includes a real USB male connector for easy plug and play action.
Presenting Minimus, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
•ATMEL AT90USB162
•22 Programmable I/O Lines
•16Kbyte Flash
•512 Byte SRAM
•512 byte EEPROM
•16 MIPS Throughput
•USB 2.0 High Speed
•5V USB Powered
•16MHz Quartz Crystal Oscillator Circuit
•Power / Status LED's
•Male USB Connector - No Cable Required
•Access to all IO's
•Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
•Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)
•Full LUFA Compatability
•Full LibUSB Compatability
•Simple Plug n Play
•High Quality productio...
Guests: 47
Spiders: 1
hidden: 0
Users: 0
Christmas