« previous next »
Pages: [1]   Go Down

Author Topic: soldering the Chotto  (Read 2267 times)

Offline Cathizzle

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
soldering the Chotto
« on: January 17, 2009, 08:08:38 PM »
Hello I've been viewing Acid Mods for a while and decided its time for me
to try a mod or two. I started the Internal Camera with the Chotto.
Everything was going smooth until I had to start soldering the pins of the
Chotto. I cannot for the life of me get the wires to stay. I'm using 26 gauge
wires with a pretty nice soldering kit. Is there any other way i can get this
done with out the pain in the ass time?

Thanks in advance for anyone who can help.
Mew~
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: soldering the Chotto
« Reply #1 on: January 17, 2009, 08:16:04 PM »
Maybe use some thinner wire, and definitely use flux.
Logged

Sig by Kenshinffx - Thanks!

Offline Cathizzle

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
Re: soldering the Chotto
« Reply #2 on: January 17, 2009, 08:49:47 PM »
Well I'm using the thinnest wire i could find
and what do you mean by flux?
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: soldering the Chotto
« Reply #3 on: January 17, 2009, 09:27:51 PM »
Logged

Sig by Kenshinffx - Thanks!

Offline Cathizzle

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
Re: soldering the Chotto
« Reply #4 on: January 17, 2009, 09:34:04 PM »
Okay Thank you
And if you don't mind me asking
What kind of flux would you recommend?
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: soldering the Chotto
« Reply #5 on: January 17, 2009, 09:37:39 PM »
Logged

Sig by Kenshinffx - Thanks!

Offline Cathizzle

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
Re: soldering the Chotto
« Reply #6 on: January 17, 2009, 09:41:17 PM »
Wow! Thanks so much!
I hope that this will get my camera inside
and running!

Thanks again!

Meow~
Logged

Offline bustinthejustin

  • Registered BST
  • E = MC² Mad Scientist
  • *
  • Posts: 2326
  • Post quality +1/-0
  • Gender: Male
Re: soldering the Chotto
« Reply #7 on: January 17, 2009, 09:47:25 PM »
No problem. If you need anything else I'd be happy to help :) Good luck, and post pictures when you're done!
Logged

Sig by Kenshinffx - Thanks!

Offline Mr. Corpsey

  • Chief squatting Hard
  • *
  • Posts: 27
  • Post quality +0/-0
Re: soldering the Chotto
« Reply #8 on: January 18, 2009, 08:42:11 AM »
flux helps so much when soldering small stuff
Logged

Offline alentris

  • Club AM VIP
  • Acid Modder
  • *
  • Posts: 727
  • Post quality +0/-0
  • Gender: Male
  • Bleep-Bloop.
Re: soldering the Chotto
« Reply #9 on: January 18, 2009, 11:26:04 AM »
Another good Idea is to buy solder with a rosin flux core, because it pretty much eliminates the need for flux on whatever you're soldering.
Logged

Thanks to HiddenVenom for the sig!

Offline Cathizzle

  • Guppy
  • *
  • Posts: 5
  • Post quality +0/-0
Re: soldering the Chotto
« Reply #10 on: January 18, 2009, 02:20:39 PM »
Ok, so i have the Flux and now i want to clarify
that it's the two most outer pins and the
five most inner pins.
Logged

Offline Sanctus

  • Acid Modder
  • *
  • Posts: 606
  • Post quality +1/-0
  • Gender: Male
Re: soldering the Chotto
« Reply #11 on: January 19, 2009, 12:06:03 AM »
Logged
Pages: [1]   Go Up
« previous next »
 
SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal