Problem with my controller

[rafaliyo86]

Sup guys!!!

Well my controller has started to do something rare. Its like you are using the analg sticks. The other buttons works well. But I think its better you see it, here is a vid:

http://www.youtube.com/watch?v=m0k8rMyc5ds

In the vid you see I start to shoot but really I dont press RT. I have to say also I have removed both analog stick and the LT and the controller makes the same

What do you think??

[Rodent]

Whoa, making me dizzy... Does it have a rapid fire? maybe one of the wires shorten something out

In the vid you see I start to shoot but really I dont press RT. I have to say also I have removed both analog stick and the LT and the controller makes the same

What do you think??

I didnt see you removed them both, had to change something or just messed up

[rafaliyo86]

No, I dont have installed rapid fire. The controller just started to do this one day. I removed both analog stick because I thought it was the reason

[Rodent]

I would look over the board really good maybe someone else had it and screwed something up? or maybe missing something?  odd that it just does that.

[Hazer]

Removing the sticks and trigger will make things worse. Thier function is to hold the analog voltage constant by the potentiometer. Removing the components means the voltage will 'float'. It could drift one way or the other, or be all over the place.

[rafaliyo86]

Removing the sticks and trigger will make things worse. Thier function is to hold the analog voltage constant by the potentiometer. Removing the components means the voltage will 'float'. It could drift one way or the other, or be all over the place.

But before I remove them it happened the same. It could be possible one of the sticks was bad and cause the fail and replacing it or both now works fine??

Thanks in advance

[Hazer]

Maybe. Its a strange problem. If you have spare parts I would try it, but I wouldnt go out and buy new parts expecting it to fix the problem. I would put an Oscope on the analogs first to see if the voltages were OK first, but you might not have that option.

[rafaliyo86]

Yes I dont have an Oscope but I have two sticks from a ps2 controller so I will try changing them.

[Anonamous]

You should try removing one of the analog sticks from one of your other controllers (assuming you have another one) and put it into the that one. If it works fine then you need to order some replacement sticks off ebay.

[rafaliyo86]

Ok guys I have replaced both stcks but nothing. I have seen one of the points its a bit broken here is a pic



do you think this is the problem?? i dont know if it was broken before i replaced the sticks

[Rodent]

all you can do is try it and see what happens , hard to tell by the pic .might be able to fix it.(maybe)