Author Topic: Will this work?  (Read 1510 times)

Offline FuSiiOn

  • Guppy
  • *
  • Posts: 1
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Will this work?
« on: May 21, 2012, 10:59:06 AM »
http://i1251.photobucket.com/albums/hh556/Sohail__Ali123/Untitled.jpg
Hi Guys, Please tell me , will this work. Basically, i have done the mod to both speaker ports. That is 4 LEDS,s together. Also, if i add another LED onto each bit, will the resistors stil be 30 and 191?

Offline Modded Matt

  • Site Owner
  • Administrator
  • Around the block
  • *
  • Posts: 4649
  • Post quality +65/-3
  • Gender: Male
Re: Will this work?
« Reply #1 on: May 21, 2012, 03:38:04 PM »
welcome to the site Fusiion.

what are you trying to do here? is there a reason for using two amps? those resistors are not for the led's and they should remain the same. you should test the output and use a resistor that matches your led array (you can use more than one led, the pic is just an example). In theory, I would say the output and supply is equal to the amp's supply, or 5V

I have personally never used this set up, I generally mod the xbox so someone correct me if I am wrong.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal