900 paint job and cable management

[Tec_]

my old set up had been driving me crazy

old (before new desk and monitor)



so i cut, painted and cleaned








switch placement for cathodes




flipped PSU (using spray paint caps till i get my new case feet)



and that about dose it

[tmandt]

looks nice. wish i had my own comp. intrested in a cheap hd brand new. seagate 160 gb barracuda. pm me

[Ch4rL13]

nice, i need to get to work on mine.
wheres ur psu?
and where did you get that amd fan? did that come with a amd processer or sumthing?

[pinoyballa]

The PSU is on the bottom left of the picture, the Antec 900 has it put there, but nice job!

[psp339]

Nice Job. What kind of paint did you use and how did  you mount that switch?

[Tec_]

looks nice. wish i had my own comp. intrested in a cheap hd brand new. seagate 160 gb barracuda. pm me

thanks for the offer, but im done buying hard drives under 500 GB's.

nice, i need to get to work on mine.
wheres ur psu?
and where did you get that amd fan? did that come with a amd processer or sumthing?

the amd fan is the stock CPU cooler. and the PSU is in the bottom left. i flipped it so it vents down and out of the case.

Nice Job. What kind of paint did you use and how did  you mount that switch?

i used dupli-color its an automotive paint.
step
1.sand and clean
2.prime with self etching primer
3.paint with black engine enamel
(there is more to it than that but thats the over view)

as for the switch its a rocker switch that came with the cathodes i just drilled a hole for it and ran the wires.


but on to the update. i went down to mnpctech met the owner and picked up a set of feet and talked computers and modding for a bit. it was very cool.

but hear are the pics