Author Topic: psp turns on but wont stay on (Read 5096 times)

cameron14 · « **on:** August 03, 2010, 03:40:39 PM »

my psp keeps shutting down rite after it turns on

please help

VE_0803101527.3g2

COD3-BRKR · « **Reply #1 on:** August 03, 2010, 04:21:18 PM »

problably bricked try using a pandora battery to install custom or official firmware and it will turn on (if it is actually bricked) ,anything else i dont know hope this helps.

cameron14 · « **Reply #2 on:** August 03, 2010, 04:46:00 PM »

heres what happends when i try pandora
its not bricked
0803101642.3g2

COD3-BRKR · « **Reply #3 on:** August 03, 2010, 04:50:43 PM »

i think this hapened to me once on my slim and somebody told me something about a power fuse that you have to bridge look that up it might be the answer.

cameron14 · « **Reply #4 on:** August 03, 2010, 04:58:33 PM »

i tryed that too

COD3-BRKR · « **Reply #5 on:** August 03, 2010, 05:08:07 PM »

well i dont know anything else were you recently modding it what where you doing befor it messed up?

cameron14 · « **Reply #6 on:** August 03, 2010, 05:11:03 PM »

i had 14 leds and a lm386 all i did was unsolder those and remove them.but now it dosent work

COD3-BRKR · « **Reply #7 on:** August 03, 2010, 05:16:52 PM »

hmmm... maybe try comparing your mobo to a working one to see if you accidently bridged or chipped of one of those tiny resistors. might be the problem.

cameron14 · « **Reply #8 on:** August 03, 2010, 05:20:51 PM »

i have another psp phat but the screen dosent light up so there might be something wrong with that one too!:(

sakobatoneko · « **Reply #9 on:** August 03, 2010, 05:41:50 PM »

check for anything causing shorts

cameron14 · « **Reply #10 on:** August 03, 2010, 09:00:16 PM »

thanks! i just scrapped all the resin off of stuff and it works now:D thanks so much!!!

COD3-BRKR · « **Reply #11 on:** August 03, 2010, 09:03:55 PM »

yay another psp saved

cameron14 · « **Reply #12 on:** August 03, 2010, 09:30:21 PM »

haha now if i could just get my other one to work:(

COD3-BRKR · « **Reply #13 on:** August 03, 2010, 09:34:19 PM »

whats wrong with it?

cameron14 · « **Reply #14 on:** August 03, 2010, 09:38:16 PM »

the screen dosent light up or anything

COD3-BRKR · « **Reply #15 on:** August 03, 2010, 09:45:52 PM »

if the conection isnt ripped then it might be that you blew the backlite fuse if you bridge it it should light up.

this is for the slim (not my pics)
http://media.photobucket.com/image/psp%20slim%20backlight%20fuse/alexcylecopley/lbsoundfuselocal-1.jpg

this is for the phat

Uploaded with ImageShack.us

Hope this helps.

cameron14 · « **Reply #16 on:** August 03, 2010, 10:30:41 PM »

i tryed that and it dident work:( but its okay im glad i got my phat working now:) now i just gotta mod my slim:D

cinki · « **Reply #17 on:** August 23, 2010, 07:51:47 AM »

have u try pressing the backlight connnector?

akomismo01 · « **Reply #18 on:** August 24, 2010, 04:42:13 AM »

There should be a blob of solder somewhere. That happened to me when i try to change all the colors of my LED. Try finding it with a magnifying glass. I could be small blob of solder that caused the short.

boudkillz · « **Reply #19 on:** September 08, 2010, 04:14:33 PM »

Quote from: cameron14 on August 03, 2010, 05:20:51 PM

i have another psp phat but the screen dosent light up so there might be something wrong with that one too!:(

for the screen this already happen to me it's only the backlight fuse broke solder over it and it'll work google it to see where is the fuse placed

News:

Author Topic: psp turns on but wont stay on (Read 5096 times)