Author Topic: where to wire leds when using this plugin... (Read 9031 times)

Dazzerr-- · « **on:** January 13, 2008, 09:06:25 AM »

Where do i wire leds when using this plugin http://dl.qj.net/index.php?pg=12&fid=13538&catid=151
...?

I will use 0603 blue leds.

blackburn · « **Reply #1 on:** January 13, 2008, 09:19:41 AM »

i would test this with a meter, but it seems like it run from the point on the outside (far left and far right), standard USB ports ground and positive connection are the points on the outside edges

Dazzerr-- · « **Reply #2 on:** January 13, 2008, 09:21:11 AM »

what??

odilio · « **Reply #3 on:** January 13, 2008, 09:29:58 AM »

On what Firmware can i put it on ( i have 3.71 M33)

Dazzerr-- · « **Reply #4 on:** January 13, 2008, 09:34:57 AM »

yeah you can put it on that.
But where am i supposed to solder the leds?

odilio · « **Reply #5 on:** January 13, 2008, 10:16:47 AM »

On the 2 point where the orange colored pins from the Chotto chot cam contact with the psp

odilio · « **Reply #6 on:** January 13, 2008, 10:29:43 AM »

I tried the plugin but i get an error it says something like the ERROR Connecting USB-GPS ( some numbers )

I put it in module cause i have no nodule folder

tibor28 · « **Reply #7 on:** January 13, 2008, 10:42:50 AM »

it would be nice is someone could make a picture showing where to connect the leds coz i am also interested in this plugin

Dazzerr-- · « **Reply #8 on:** January 14, 2008, 07:25:02 AM »

Quote

On the 2 point where the orange colored pins from the Chotto chot cam contact with the psp

Where is that?

DubbleDutch · « **Reply #9 on:** January 14, 2008, 07:29:21 AM »

Quote from: Dazzerr-- on January 14, 2008, 07:25:02 AM

Where is that?

on top of the psp doh

it is on the left and the right of the female usb port

kairu67 · « **Reply #10 on:** January 14, 2008, 08:16:54 AM »

http://pinouts.ru/Slots/USB_pinout.shtml

and also, will this mod work with usb charge? how do i need to wire it to use usb charge?

DubbleDutch · « **Reply #11 on:** January 14, 2008, 08:21:27 AM »

,..................

look at the top of your psp

u'll see the female usb ports
on the LEFT and the RIGHT of the usb ports are holes
these 2 holes are the ones that are used for the plugin, go!cam, chotto shot, mic, etc...

kairu67 · « **Reply #12 on:** January 14, 2008, 08:33:33 AM »

ooh, they are the contact pads on the top that you solder to.. i thought you soldered directly to the mini usb female port, on the +5 and ground. so this would work with usb charge... ill meter it before i install them, but it and usb charge should work i think

tibor28 · « **Reply #13 on:** January 14, 2008, 09:00:45 AM »

Quote from: DubbleDutch on January 14, 2008, 08:21:27 AM

,..................

look at the top of your psp

u'll see the female usb ports
on the LEFT and the RIGHT of the usb ports are holes
these 2 holes are the ones that are used for the plugin, go!cam, chotto shot, mic, etc...

those holes are just for screws!! there is no current or anything passing through them

Dazzerr-- · « **Reply #14 on:** January 14, 2008, 10:12:37 AM »

He isnt on about the holes.

Right beside the female USB port there are 2 orange things. you cant miss them.

tibor28 · « **Reply #15 on:** January 14, 2008, 11:46:34 AM »

Quote from: Dazzerr-- on January 14, 2008, 10:12:37 AM

He isnt on about the holes.

Right beside the female USB port there are 2 orange things. you cant miss them.

the ones in red or green squares? how much does it output? 3.6 or 5V?

kairu67 · « **Reply #16 on:** January 15, 2008, 08:16:19 AM »

i am pretty sure its the red ones

when you solder your leds there would you mind trying to see if this plugin works with usb charge? it would be greatly appreciated

if you do please email me at
kylesoldname92 (at) gmail (dot) com

and i am pretty sure it is 5v

Dazzerr-- · « **Reply #17 on:** January 15, 2008, 08:27:25 AM »

when your psp is in one peice. RIGHT BESIDE the usb of the PSP is 2 orange things!! and i think its 5v...

Quote

I tried the plugin but i get an error it says something like the ERROR Connecting USB-GPS ( some numbers )

I put it in module cause i have no nodule folder

What firmware are you on.

i advise you change the name of the plugin to 'lftv_plugin.prx' .
^^this may work just go on the XMB icon 'location free player'

By the way it MUST go in nodule NOT module

kairu67 · « **Reply #18 on:** January 15, 2008, 08:50:21 AM »

has anyone tested this yet on 3.80 m33?

DubbleDutch · « **Reply #19 on:** January 15, 2008, 09:04:36 AM »

Quote from: tibor28 on January 14, 2008, 09:00:45 AM

those holes are just for screws!! there is no current or anything passing through them

if i meant the screw holes i'd said that,..

do i look so stupid to think the current will flow thrue the screws ??

tibor28 · « **Reply #20 on:** January 15, 2008, 09:06:00 AM »

Quote from: DubbleDutch on January 15, 2008, 09:04:36 AM

if i meant the screw holes i'd said that,..

do i look so stupid to think the current will flow thrue the screws ??

i never saw u (joke)

odilio · « **Reply #21 on:** January 15, 2008, 10:00:21 AM »

Quote from: kairu67 on January 15, 2008, 08:50:21 AM

has anyone tested this yet on 3.80 m33?

I dit but i get the same messsage ( and re placed lftv_plugin.prx with the plugin in Flash0) The message syas: Error activating USB GPS (0x8005) thats exact wat is says and no light i put on a led the correct way i tested it with the oran ge holes olmost the usb port so close are they

Dazzerr-- · « **Reply #22 on:** January 15, 2008, 11:09:01 AM »

rite, im gonna try the plugin as soon as i get my psp case. odilio can you show a pic of what you have done?

there is no nodule directory for 3.80 M33.
do you have one?

also try renaming it to premo_plugin.prx . this will replace the XMB icon remote play

GhoSt · « **Reply #23 on:** January 15, 2008, 03:12:05 PM »

oh so this cant work on 3.80m33? too bad

DubbleDutch · « **Reply #24 on:** January 16, 2008, 07:33:24 AM »

the system maps are hidden in the flash0

just type the address in the bar

x:/vsh/nodule etc......... (dont know if that line is correct but you just need to type that and x is the drive where the psp is connected so it may be different)

Dazzerr-- · « **Reply #25 on:** January 16, 2008, 08:55:14 AM »

i got it. Thanks.
Your way didnt work lol. i had to go on tools/folder options/view and then click show system files.
oh well, your help is appreciated

so has anybody succesfully done this yet?.

hopefully my psp case is here tonight and i can try

I have just put the plugin on my psp and it says Error activationg usb gps (0x8005)
(i have no leds connected to my PSP though. i just decided to put the plugin in lol

odilio · « **Reply #26 on:** January 16, 2008, 12:53:06 PM »

Quote from: Dazzerr-- on January 15, 2008, 11:09:01 AM

rite, im gonna try the plugin as soon as i get my psp case. odilio can you show a pic of what you have done?

there is no nodule directory for 3.80 M33.
do you have one?

also try renaming it to premo_plugin.prx . this will replace the XMB icon remote play

I type in the adress bar X/Flash0/vsh/nodule or module and i came in the map no/module so i named it lftv_plugine cause i dont use location free and a want remote play to work cause i have a ps3 so i dont know if its work on the later firmwarei think we maybe can usa the plugin as a plugine in the seplugins map or en an OE firmware that wat i think

kairu67 · « **Reply #27 on:** January 16, 2008, 06:33:16 PM »

did not work for me on 3.80m33-4
i got error
activating usb gps 0x8005

did they change the hex value of the gps/power thing? would we be able to change it with hexedit if we found where it is now?

i do NOT think its my psp, ive tried it on many different plugins..... idk maybe someone else has had success

if not, back to 3.52 for me

Dazzerr-- · « **Reply #28 on:** January 17, 2008, 11:54:14 AM »

Quote

I type in the adress bar X/Flash0/vsh/nodule or module and i came in the map no/module so i named it lftv_plugine cause i dont use location free and a want remote play to work cause i have a ps3 so i dont know if its work on the later firmwarei think we maybe can usa the plugin as a plugine in the seplugins map or en an OE firmware that wat i think

Just go to tools/folder options/view and then click 'show operating system files' (something like that) there is a module but no nodule

I think you might have to solder it in a different location... ??
doubt it but does this give any information?

PIN#


SIGNAL


PIN# SIGNAL
1   +5
2   -DATA
3   +DATA
4   NC
5   GND

Pin 1 and pin 5.

News:

Author Topic: where to wire leds when using this plugin... (Read 9031 times)