analogue wont return to center

[Nemesis]

ive dis-assembled my analogue stick and put everything back together and now it wont return to the center. i move it to one side and it stays there. i have dis-assembled and re-assembled many times but it still does the same thing.

help would be appreciated

EDIT: i found out that when the circut board is not placed, it works but as soon as the pressure is applied from the circuit board it gets stuck.
what could b wrong? 

[prettierwendead]

Make ure the spring is in place if it is in there just fiddle with it till it starts to self center

[FaT3oYCG]

i was told that if you stick the spring in a central position with a tiny amount of super glue, when i say tiny, one knock will make the super glue come off, then put it together and move the stick in a circular motion it will break the super glue and self center much quicker

[Nemesis]

i have centered it and stuff but my problem is when i move it to one side its doesnt move back when its all assembled together, but when its only the top bit without the sliders it works perfectly..

[Thorax]

I had the same problem. Watch this video. It helped me get fix mine when I took mine apart.

[Nemesis]

I had the same problem. Watch this video. It helped me get fix mine when I took mine apart.

it aint working but is it one of sum guy taking it apart and puttin it back together, only one i do see on google vids and youtube

[Thorax]

I think I know what the problem is. Make sure your spring didn't unhook from the loop.

[Nemesis]

I think I know what the problem is. Make sure your spring didn't unhook from the loop.

well it does unhook sometimes when i try to assemble it but i hook it back and assemble the top half and it works until i assemble it completely, maybe it unhooks den?