Author Topic: NES Repair help  (Read 3008 times)

Offline knighx

  • Chief squatting Hard
  • *
  • Posts: 14
  • Post quality +0/-0
  • Gender: Male
NES Repair help
« on: February 17, 2008, 08:02:01 PM »
I have recived an old NEs and i went to turn it on  and the ligt would flash on then off i was wondering what i would have to do  to fix it

Offline Stormy

  • Guppy
  • *
  • Posts: 8
  • Post quality +0/-0
  • Gender: Male
Re: NES Repair help
« Reply #1 on: February 18, 2008, 10:44:38 PM »
Its probably the pins, I would open it up and take the pins off the mother board and use a cotton swab with alcohol and some air in a can to clean them.  If that does not work then it would be that the cartridge is not going down all the way and making full contact.  This can be fixed by taking the cartridge mechanism off the mother board and using needle nose pliers to bend the little metal peice that keeps the cartridge down towards you so that it closes tighter, this may take some fine tuning to get it to go up and down just right.

I have done this multiple times and it should work.

Offline MattZani

  • Around the block
  • *
  • Posts: 4582
  • Post quality +0/-0
  • Gender: Male
  • Matthew Dear
    • DeviantArt
Re: NES Repair help
« Reply #2 on: February 19, 2008, 05:56:34 AM »
Red Flashing either means:
Cart is wrong region
no cart is inserted
Cart is not making proper contact.
Retired Modder, minor dabbling from now on :P

Offline *FuFa

  • learn2/spell/
  • Millennium Poster
  • *
  • Posts: 1316
  • Post quality +0/-0
  • Gender: Male
  • Spam King Barfday Boy¯\(°_o)/¯ ¯\(°_o)/¯ ¯\(°_o)/¯
Re: NES Repair help
« Reply #3 on: February 21, 2008, 10:00:58 AM »
Red Flashing either means:
Cart is wrong region
no cart is inserted
Cart is not making proper contact.

There was also a problem where the chip that checks if the Cardridge was licensed died, there was a fix for that, let me look it up real quick.

http://www.swscenter.org/index.php?option=com_content&task=view&id=38&Itemid=42
« Last Edit: February 21, 2008, 10:02:41 AM by *FuFa »

Have no shame in being kindly and gentle, but if the time comes in the time of your life to kill, kill and have no regret. In the time of your life, live so that, in that wonderous time you shall not add to the misery and sorrow of the world, but shall smile to the infinite delight and mystery of it.

Offline spinal

  • ♪♪♪ Tone deff ♪♪♪
  • *
  • Posts: 62
  • Post quality +0/-0
  • Gender: Male
Re: NES Repair help
« Reply #4 on: April 11, 2008, 04:53:32 PM »
Its most likely that the pins aren't making proper contact anymore. It's quite easy to fix, just open up the nes, remove the cart slot and bend the contacts a bit with a pin of something.

The problem is caused by the design of the slot, through time, the pins bend away from their original position. If you do not wish to spend the time doing this, you can buy now connectors online some place.

Offline Skullmaster

  • God Of Cars
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1520
  • Post quality +1/-0
  • Gender: Male
  • Admin Force, Co-Owner Wanna-be
    • Acidmods
Re: NES Repair help
« Reply #5 on: April 13, 2008, 09:28:38 PM »
I should do this to mine, even though I dont use it anymore. When I used to play it, I would just give it a few good hits and it would work :p

Offline Aricado

  • Granny Spanker
  • *
  • Posts: 398
  • Post quality +0/-0
  • Gender: Male
  • Hiding under your bed devouring your dreams..
Re: NES Repair help
« Reply #6 on: April 24, 2008, 02:20:20 AM »
If you don't want to spend money and w8 for a new connector to come grab a soft toothbrush and with alcohol rub the pins and contacts and be carefull not to bend anything.That damn works for my 4 NES's and if it's your cartridge open your cartridge and rub the contacts with an eraser.These are the best ways to clean and maintain retro hardware.

Aricado: Kenshinffx made my sig.
"I made your Avatar too!"
Aricado: Get outta my head!!!!

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal