Author Topic: Analog Nub on the RIght Side (Read 37113 times)

SYSTEM aka (Cyberpyrot) · « **on:** March 27, 2008, 04:35:08 PM »

Thats Right I said "ANALOG" on the right side.. This is not the Razor X. and this design will only be made for the PSP Slim.. This will be analog so when you barly press the sony nub on the right side up it will move the cross hairs slowly as you move the nub up more the cross hairs will pick up speed. You will be poping an un modified Sony analog Nub into the right side of the slim and connect to the chip I invented. Befor I go into details on how it works let me get a few things out in the open...

1: I will not release the blueprints or the code until they are mass produced. This is because of the complexity of the design..

2: it will take months to produce but we will post a poc soon like this weekend.

3: this does not stop the razor x. You should get and enjoy the razor and when this board is ready Upgrading will be simple..

4: Since the complexity of this board Imagesco.com will produce and coolmods will have the option to be a reseller.

ok now to the "How it Works" you will buy a sony analog nub and solder wires to the 4 pins on the underside then solder those wires to the board we producethen connect the ribon cables from the psp mobo to the PCB we produce and fit the nub. Of corce there will be some more detailed intructions down the line...

Once installed there will be an true analog nub on the right side like the one on the left side. but it will have a few added featers. you will be able to select diffrent modes by pressing the " ♪ " button for .5 seconds the

First mode: will be analog Face buttons we acomplish this by hijacking the ribon cable and running the analog signal through our microcontroller our software decodes it then feeds the data through the ribon cable directly into the mobo.

Second Mode: will map the D-pad to the right nub and convert that to analog as well. This feature will allow you to customize the psp how you want it. It will also alow home brew developers to further push there technology.

All this will be done thanks to the hard work of our microcontroller modding group and the dedication of our members.. If any one would like to donate to the R&D budget please send to Sales@acidmods.com all new technologe is researched from money out of our own pockets we get nothing from the people who mass produce it till later and that is a very small percentage and just covers server expences..

DUKE · « **Reply #1 on:** March 27, 2008, 05:16:10 PM »

your right that did blow my mind, what can't you guys do!

metalfreak187 · « **Reply #2 on:** March 27, 2008, 05:58:01 PM »

I'm buying a slim right now!!! Can we say "Joy-gasm"?!

_BMFC

kanvas · « **Reply #3 on:** March 28, 2008, 11:20:47 AM »

Wow powerful news esp when you have just released razor x do you not sleep? was thinking of getting a psp slim for my girlfriend and i am tempted to do this for her.

Just to clarify though: from what I understand of the first option of this new analog stick, functionally (when playing games) it is basically the same as razor x right?

Tri-edge · « **Reply #4 on:** March 28, 2008, 02:46:40 PM »

yes except it's true analog

seikene · « **Reply #5 on:** March 28, 2008, 04:14:16 PM »

Seriously o.0, meh even though I'm not a psp person, this is something that opens alot for modders IN GENERAL!

SYSTEM aka (Cyberpyrot) · « **Reply #6 on:** March 28, 2008, 05:26:32 PM »

Ok to give you an example of the diffrences in technology I made some graphs...

On the left side you have the Razor X design as you can see you have 8 points of directions. so when using the razor you can achieve diagonal by moving equal distences between up and left directions. So this being said the Razor X was a big leap in technology since befor you had to move up first then left to get your crosshairs in a diagonal direction.

The Razor X has two speed of movement on and off, Stop and go. meaning you can move the cursor or stop..

Now the Gen 360° technology in comparison has 360 variations of directions meaning you can move the cursor in many positions faster allowing you to get the drop on your enemies alot faster ultimatly meaning more head shots... Lets think about that for a second you can now move in any direction you want with the right analog stick..

With the Gen 360° you have 255 levels of intecity meaning if you barly push up on the stick you will move slowly as you increase the distance from dead center your cursor will increase in speed.So with all that being said the futur of gaming has changed.. Now we control how games are played...

[HoP] · « **Reply #7 on:** March 29, 2008, 07:24:42 AM »

schweeeet!

kanvas · « **Reply #8 on:** March 29, 2008, 08:14:49 AM »

Ah I see. Much clear idea now....very impressive... sigh wish this can be can be done on the phat as well though.

SYSTEM aka (Cyberpyrot) · « **Reply #9 on:** March 29, 2008, 08:34:24 AM »

Quote from: kanvas on March 29, 2008, 08:14:49 AM

Ah I see. Much clear idea now....very impressive... sigh wish this can be can be done on the phat as well though.

once revisions are made the phat will follow we just have loads of space in the slim..

GhoSt · « **Reply #10 on:** March 29, 2008, 01:29:05 PM »

awesome... you can move in like any direction i would like to see one made dats like completly blue :P . too bad your not doing on for phat

DubbleDutch · « **Reply #11 on:** March 31, 2008, 06:05:49 AM »

Nice Job cyber

T3KN1K4L · « **Reply #12 on:** March 31, 2008, 01:55:11 PM »

Pure genius! Of course I could have done it too... LOL J/K good job man... Now only a few more components to go untill we have our super top secret, hush, hush world domination device... Shhhhhh!

ra1n · « **Reply #13 on:** March 31, 2008, 07:22:24 PM »

And I thought it couldn't get better then the razor X

T3KN1K4L · « **Reply #14 on:** April 02, 2008, 03:09:14 PM »

Following the "X" theme I suggest the codename be changed to Analog X... Just an Idea...

JoblessPunk · « **Reply #15 on:** April 05, 2008, 03:01:51 AM »

So Cyberpyrot,
I'm planing on putting the Razor X into my PSP Slim after the tutorial is done.
If I read it right, your saying that I should still do that then later it will be easy to upgrade my Razor X right side Nub to the Gen 360°?

I just don't want to take the time to install the Razor X then a few months later have to rip it all out and start all over again.

ChopperDave · « **Reply #16 on:** April 08, 2008, 03:15:46 PM »

Quote from: T3KN1K4L on April 02, 2008, 03:09:14 PM

Following the "X" theme I suggest the codename be changed to Analog X... Just an Idea...

www.analogx.com

already the name of a software developer but...whatever

T3KN1K4L · « **Reply #17 on:** April 09, 2008, 02:51:58 PM »

Quote from: ChopperDave on April 08, 2008, 03:15:46 PM

www.analogx.com

already the name of a software developer but...whatever

Well, um... They stole my idea... Yeah that's it, they stole my idea, before I even knew it was my idea... Yeah... But anyway, code-names for products and developmental items have been used for years, so no harm in naming it the same name.

blueVenom · « **Reply #18 on:** May 11, 2008, 02:10:16 PM »

Is this a form to brainstorm ideas for the analog because i got a few ideas to bring to the table.

JoblessPunk · « **Reply #19 on:** May 20, 2008, 11:13:12 AM »

I was wondering how this was coming along... any news? are the new boards in production yet?

Gamer4life · « **Reply #20 on:** May 20, 2008, 11:24:38 AM »

i want this board 2 it looks and sounds freakin awesome do have 2 remove the ac port in the slim 4 this board as well because i know u have 2 with the razor 1

External Darkness · « **Reply #21 on:** May 20, 2008, 12:11:53 PM »

wow real nice man that's what I'm talking bout creation of your own boards....mmmmmm yummy

I want one....

kink192 · « **Reply #22 on:** May 20, 2008, 12:17:47 PM »

now im really regretting trading my slim for a phat...i hope this works out well, im super geeked about it since all i play is fps now a days

ApheX · « **Reply #23 on:** May 27, 2008, 02:41:37 AM »

Brilliant work! Really looking forward to this being finished, maybe you could explane to sony how you did this, teach them a think or two in regards to 'what people want!'. Keep up the great work mate! (and the team)

Cratos · « **Reply #24 on:** May 27, 2008, 09:09:05 PM »

cant wait

JoblessPunk · « **Reply #25 on:** May 27, 2008, 09:13:04 PM »

Quote from: Aphex85 on May 27, 2008, 02:41:37 AM

Brilliant work! Really looking forward to this being finished, maybe you could explane to sony how you did this, teach them a think or two in regards to 'what people want!'. Keep up the great work mate! (and the team)

I feel the exactly the same. Keep it up guys I can't wait till this is done.

do you guys have any news?
Are you just waiting to get the parts manufactured or are you still developing it?

Cratos · « **Reply #26 on:** June 01, 2008, 03:02:01 PM »

can you because post you progress i want to see whats going on

VoX · « **Reply #27 on:** June 02, 2008, 12:14:25 AM »

It is still in development, please wait patiently for any news. This looks like a very good project and I hope it works great

JoblessPunk · « **Reply #28 on:** June 12, 2008, 12:37:35 PM »

anything?

I'll put in some money for this if it will make it come out quicker

anthonyta · « **Reply #29 on:** June 12, 2008, 06:41:18 PM »

maybe the HIVE will help us do this!? yea?

News:

Author Topic: Analog Nub on the RIght Side (Read 37113 times)

VoX