Author Topic: Rapid Fire Method (No Chip) (Read 380302 times)

louielesko · « **Reply #240 on:** August 02, 2008, 07:48:36 PM »

listen i need help bad like tonight.. but i soldered the wires and its shooting automatically.. like by itself in rapid fire without me hitting the button.. please help what is going on?

thanks

pistolpete3521 · « **Reply #241 on:** August 02, 2008, 09:41:40 PM »

Ok, louielesko, I have yet to do this to my controller (have to check for the model), but it sounds to me like you have the tact switch soldered on opposite terminals instead of the ones on the same side... look at the diagram on Pg. 1. Or you have the wrong type of switch.

yuckzee · « **Reply #242 on:** August 02, 2008, 10:54:55 PM »

Quote from: louielesko on August 02, 2008, 07:48:36 PM

listen i need help bad like tonight.. but i soldered the wires and its shooting automatically.. like by itself in rapid fire without me hitting the button.. please help what is going on?

thanks

sounds like the trigger is stuck on the controlor, try smacking the controlor or pulling the trigger alot...or try switching out the button

Jinn · « **Reply #243 on:** August 03, 2008, 08:28:00 PM »

LED to Right Trigger works great. For anyone having problems use ALT Point for LED contact. Thanks KM

superaison · « **Reply #244 on:** August 03, 2008, 09:56:39 PM »

Actually.

I figured something out.

You can actually solder the wire that should be on the - of the LED, to anything..

i solder it to the ground of the rumble.

Even the metal on the analog sticks works!

Cobyyy · « **Reply #245 on:** August 04, 2008, 04:46:10 PM »

hi im new to this forum and i tried this mod recently and all went well the button would work but not rapid fire.
did i do something wrong?
i could supply pics if needed.
can this only work with AA batteries?
i used a rechargable battery pack.

Crazy Germans · « **Reply #246 on:** August 04, 2008, 05:07:11 PM »

Quote from: superaison on August 03, 2008, 09:56:39 PM

Actually.

I figured something out.

You can actually solder the wire that should be on the - of the LED, to anything..

i solder it to the ground of the rumble.

Even the metal on the analog sticks works!

I'm not really sure how this whole thing works, but wouldn't i make sense that it works when you solder to the ground on the rumble, cuz that would pulse then whenever the controller rumbles? Or is that not how it works?

gameroms · « **Reply #247 on:** August 04, 2008, 07:01:42 PM »

THE RUMBLE CONNECTIONS ARE NOT RECCOMENDED FOR ANY OF ACIDMODS KITS, THERE NOT STABLE ENOUGH.

antitime · « **Reply #248 on:** August 04, 2008, 09:36:08 PM »

A friend and I tried this mod today just for giggles.
First of all, it doesn't seem to work even a first-gen wired controller.
We used a TP19 old-style wireless controller next. Soldered the wires up, and it would work every once in a while, but not consistently.
We then remembered the note about not using fresh AA batteries....so we snatched the AA's out of the TV remote, popped em in the controller....now it works great every time.
Just for info, we soldered to the left side of the P1 LED.
So, if you guys have problems with the mod...don't use wired or rechargeable, make sure you're using USED AA batteries.

XxKILLx3RxX · « **Reply #249 on:** August 05, 2008, 11:56:04 AM »

This mod works perfectly.

I'm using a PnC battery so it works. Also if your controller is off and you have the battery in and you press the button, it lights up a little.

swxc86 · « **Reply #250 on:** August 06, 2008, 01:24:45 PM »

What is the wired CG version of the controller? i got mine for christmas, will the mod still work?

louielesko · « **Reply #251 on:** August 06, 2008, 02:12:51 PM »

so this no chip mod does not work on new boards what so ever? and is there any way to get it to work?

M3nic · « **Reply #252 on:** August 06, 2008, 04:22:27 PM »

Any1 kno what kind of resistor you use to make it work on a full charge??

If it has allrdy been posted or there is a thread please direct....

soupspeedway · « **Reply #253 on:** August 07, 2008, 12:09:00 PM »

Does this work with wired controllers because Followed the steps -attached to middle of 3 spikes and underneath the 1 player led light. if somebody could inform me of something i did wrong that would be great thanks

sexbox · « **Reply #254 on:** August 07, 2008, 12:18:11 PM »

i am a noob and i was wondering what i did wrong if the guy just walks aroung and he doesnt stop and what gauge wite should i get

wilson08 · « **Reply #255 on:** August 07, 2008, 01:24:02 PM »

Hi, I Tried this Mod and it works perfectly!
I soldered a wire to player1 LED, Middle pin Right Triggers, From a ON/OFF Push button i drilled in the back of the controller!
If anybody wants me to, i can post videos/pics of it

soupspeedway · « **Reply #256 on:** August 07, 2008, 01:58:42 PM »

ok so i have been at this all day. I am trying to find a solder point for the power that is not the led light. for some reason that didn't work at all for me. When I look for different places to put the wire it works but it does a different action. If somebody could post a DETAILED picture of places to solder that would be amazing. Thanks! (its a wired controller)

sexbox · « **Reply #257 on:** August 07, 2008, 02:59:17 PM »

Quote from: wilson08 on August 07, 2008, 01:24:02 PM

Hi, I Tried this Mod and it works perfectly!
I soldered a wire to player1 LED, Middle pin Right Triggers, From a ON/OFF Push button i drilled in the back of the controller!
If anybody wants me to, i can post videos/pics of it

can you post good pictures with explination

Blazinkaos · « **Reply #258 on:** August 08, 2008, 01:25:02 AM »

Well this is a lot to read thro so im just gonna ask does this work with only COD4 or does it work with others...

wilson08 · « **Reply #259 on:** August 08, 2008, 02:57:19 AM »

Ok, i will post detailed pics/videos! They should be up tonight/tomorrow... Yes works well with COD havent tried Halo - But i will !

Blazinkaos · « **Reply #260 on:** August 08, 2008, 02:59:44 AM »

Ok cuz i tried it with gears of war and it also worked but with the pistol only..
Oh alright sweet man.. ill check that alter on..

wilson08 · « **Reply #261 on:** August 08, 2008, 09:43:23 AM »

Ok Thread is up ... Easy/ Deatiled Tutorial

https://www.acidmods.com/forum/index.php?topic=21716.0

swxc86 · « **Reply #262 on:** August 08, 2008, 10:24:59 AM »

so can any1 find out how to make it work for the new wired controller

PspKicks316 · « **Reply #263 on:** August 08, 2008, 10:29:50 AM »

Quote from: swxc86 on August 08, 2008, 10:24:59 AM

so can any1 find out how to make it work for the new wired controller

I'm sure if it does. If no one's posted by Monday then I'll try it myself and get back here on what happens.

SillyNuts · « **Reply #264 on:** August 08, 2008, 10:47:34 AM »

it will work with the newer wired one you just need to add a res. the the pos. cuz this mod is for a low volt what it does is really makes the led lose power then get it agin really fast sort of like a controlled short but if you are using a wired controller then its sending to much power to fast cuz you have a constant 5v feed so just add a 100k res to the pos.

swxc86 · « **Reply #265 on:** August 08, 2008, 01:33:25 PM »

Quote from: PspKicks316 on August 08, 2008, 10:29:50 AM

I'm sure if it does. If no one's posted by Monday then I'll try it myself and get back here on what happens.

Thanx i appreciate it

Blazinkaos · « **Reply #266 on:** August 08, 2008, 02:32:04 PM »

NICE wilson08 much more easy to understand for those that are like uhh u kno..
Job Well Done..

coriantumr · « **Reply #267 on:** August 08, 2008, 04:02:20 PM »

Hi can someone please help me? I just tried this today on my controller and the switch works fine, but it only is giving me single shots and not rapid fire. Has anyone else had this same problem? And if so, how did you fix it? Any help would be appreciated. Thanks!

Blazinkaos · « **Reply #268 on:** August 08, 2008, 07:29:11 PM »

Are you sure its the right motherboard for it...

wilson08 · « **Reply #269 on:** August 09, 2008, 01:40:01 AM »

Quote from: Blazinkaos on August 08, 2008, 02:32:04 PM

NICE wilson08 much more easy to understand for those that are like uhh u kno..
Job Well Done..

lol, yhh ... Thanks !

News:

Author Topic: Rapid Fire Method (No Chip) (Read 380302 times)

antitime