Author Topic: Case Help  (Read 2232 times)

Offline Sgt Lovin

  • Motor Mouth
  • *
  • Posts: 90
  • Post quality +0/-0
  • Gender: Male
  • My PSP is Unmodded still :(
Case Help
« on: May 20, 2008, 08:00:02 AM »
Well you guys i got a full case from Coolmods, and it didn't fit my primary PSP but what do you know, it went well on my second PSP cuz of the switches, but when i was putting it all together the damn Faceplate wouldn't close shut from the top right corner of the PSP (R-Trigger) side.

Any ideas?


Offline whitetop

  • E = MC² Mad Scientist
  • *
  • Posts: 1910
  • Post quality +39/-12
  • Gender: Male
  • im not in the ass kissing team
Re: Case Help
« Reply #1 on: May 20, 2008, 12:22:16 PM »
i had that problem and found out i did not put the ribbon in right
come to the rite place if you kiss admins as they promote you to admin.

Offline Sgt Lovin

  • Motor Mouth
  • *
  • Posts: 90
  • Post quality +0/-0
  • Gender: Male
  • My PSP is Unmodded still :(
Re: Case Help
« Reply #2 on: May 21, 2008, 05:54:29 AM »
i had that problem and found out i did not put the ribbon in right
Nah, that's not the problem wih mine, it just won't close shut, i had to use force to get it to close on the left side but right side would just be extremely off.


VoX

  • Guest
Re: Case Help
« Reply #3 on: May 21, 2008, 06:16:25 AM »
Could you post some pictures of the right side, it would help to figure it out

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Case Help
« Reply #4 on: May 21, 2008, 06:21:18 AM »
bit of a noob check but did you put the faceplate on starting from the top. what mean is angle the faceplace so the top is on first then press the rest down. had the same problem but finally got it to fit.

Offline Sgt Lovin

  • Motor Mouth
  • *
  • Posts: 90
  • Post quality +0/-0
  • Gender: Male
  • My PSP is Unmodded still :(
Re: Case Help
« Reply #5 on: May 21, 2008, 06:26:55 AM »
Could you post some pictures of the right side, it would help to figure it out
it's all put together in black now, and don't wanna deal with the case, nim hoping to sell it(Faceplate & backplate only)


Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Case Help
« Reply #6 on: May 21, 2008, 06:41:00 AM »
fair one dude, why don't you use the faceplate? less hassle to fit.

Offline Sgt Lovin

  • Motor Mouth
  • *
  • Posts: 90
  • Post quality +0/-0
  • Gender: Male
  • My PSP is Unmodded still :(
Re: Case Help
« Reply #7 on: May 22, 2008, 07:15:35 AM »
fair one dude, why don't you use the faceplate? less hassle to fit.
my PSP is missing the bottom screw and the analog moves on its own when i put the clear faceplate on the PSP, cuz it doesn't close shut from the bottom left where the analog is but if i put pressure there it stops moving.

So i'm selling the faceplate and backplate only!, as i sold the UMD door already and i'm keeping the buttons, battery cover and mem. stick cover so if u need clear, hit me up

 :#1:


Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Case Help
« Reply #8 on: May 22, 2008, 07:25:11 AM »
my PSP is missing the bottom screw and the analog moves on its own when i put the clear faceplate on the PSP, cuz it doesn't close shut from the bottom left where the analog is but if i put pressure there it stops moving.

So i'm selling the faceplate and backplate only!, as i sold the UMD door already and i'm keeping the buttons, battery cover and mem. stick cover so if u need clear, hit me up

 :#1:

Ah, i see, well if you had any, you could take some screws from a ps1, ps2 memory card and use one of them. lost two on my phat so i removed the screws from a ps2 mem card and they fit.

Offline GhoSt

  • Creating Null
  • Around the block
  • *
  • Posts: 2552
  • Post quality +19/-0
  • Gender: Male
  • Null Pointer Exception
Re: Case Help
« Reply #9 on: May 22, 2008, 04:26:38 PM »
ok i did this wth my dx case too, i found it was the little metal bit that holds the analog pad thing when shuting the case try work this peice in with a screw driver so it goes inside and doesn't press down on the thight edging of the case when u are shutting it
|Variegation - GhoSt's Final Controller|

|Nothing is deterministic.|

Offline Ch4rL13

  • R4z3R
  • Acid Modder
  • *
  • Posts: 869
  • Post quality +0/-0
  • Gender: Male
    • R4z3R Gaming
Re: Case Help
« Reply #10 on: May 22, 2008, 04:43:05 PM »
same problem, is wut i do is shut the faceplate from the top, not the bottom so ust like put the faceplate on from the top then go down, and dude dont sell it, its perfectly fine, if u have another black screw (maybe the top one on the right) put that where the nub is, just like push it hard together then add the screw. i got the same case and it fixes all my problems :D


Offline pax

  • CyberPyrot WannaBe
  • *
  • Posts: 303
  • Post quality +0/-0
  • Gender: Male
  • Sig and Avatar by INDYCHASE
    • GAMING LAGOON - Join now for free prizes
Re: Case Help
« Reply #11 on: May 24, 2008, 04:33:22 AM »
Ah, i see, well if you had any, you could take some screws from a ps1, ps2 memory card and use one of them. lost two on my phat so i removed the screws from a ps2 mem card and they fit.

i lost a screw on my phat psp and i tried the screws from the ps2 memory card but they're too big, are you sure they fit?

Guppy > Chief Squatting Hard > 1/2 Pint > Fart Sniffer > Tone Deff > Motor Mouth > Allumnist > King of the Wii-tards > Who Farted > Poker Champ > Chaos Lover > Bomb Maker > CyberPyrot Wannabe

Offline Luke

  • E = MC² Mad Scientist
  • *
  • Posts: 1923
  • Post quality +12/-0
  • Gender: Male
  • ..
Re: Case Help
« Reply #12 on: May 24, 2008, 04:47:10 AM »
i lost a screw on my phat psp and i tried the screws from the ps2 memory card but they're too big, are you sure they fit?

all ps2 memory cards are different remenber

Offline ApheX

  • Club AM VIP
  • Millennium Poster
  • *
  • Posts: 1094
  • Post quality +1/-0
  • Gender: Male
  • PSP And PSP Slim Case/Hardware Modder
    • ApheX MoDs
Re: Case Help
« Reply #13 on: May 24, 2008, 04:52:23 AM »
i lost a screw on my phat psp and i tried the screws from the ps2 memory card but they're too big, are you sure they fit?

Yeah it does. i use two from an offical sony ps2 memory card and it was fine. had to replace the bottom left screw and the top right due to me striping the original ones.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal