Author Topic: Can i use 32 AWG kynar wire?? (Read 6164 times)

ragrme · « **on:** July 02, 2008, 03:59:27 AM »

please reply asap..
can i use 32gauge wire as replacement for 30 gauge wire in modding my psp??

DubbleDutch · « **Reply #1 on:** July 02, 2008, 04:38:07 AM »

as long as it is thin and it fits

and doesnt cause any shorts

ragrme · « **Reply #2 on:** July 02, 2008, 04:46:49 AM »

the 32 awg kynar wire is thinner than the 30 awg..
are you sure its ok?

DubbleDutch · « **Reply #3 on:** July 02, 2008, 05:59:57 AM »

as long as you can solder it to the leds there is no problem

Timmy · « **Reply #4 on:** July 02, 2008, 06:27:06 AM »

no problems man

the main thing you have to watch for when it comes to thickness is voltage rating as it could burn out if its rated lower then what your using

but 32 AWG should be able to handle any voltage you will come across when modding a PSP as i've used 0.1mm magnet wrap with no issues so i don't think you'll have any problems

ragrme · « **Reply #5 on:** July 02, 2008, 06:41:06 AM »

another question please..
about the LEDs..

the L.E.D.s used in backlight of cellphones
are they the same or can i use it for modding in PSP??

i dont know if they are SMD L.E.D.s..

rceckspurt13 · « **Reply #6 on:** July 02, 2008, 07:42:05 AM »

they sure are the same. That's what I was going to use in my psp when I got around to it.

tripsalot · « **Reply #7 on:** July 02, 2008, 08:45:09 AM »

all my leds are salvaged off old cell phones,they work great and are realy bright

JWhiteLightning · « **Reply #8 on:** July 02, 2008, 11:21:46 AM »

DANG!!! There is smaller wire than the 30AWG?

yeah, it should work though, but good luck stripping the wire.

ragrme · « **Reply #9 on:** July 02, 2008, 05:45:57 PM »

@jwhite lightning..
yes there is, in fact there is 35 or 36 AWG which is the thinnest..
see AWG in wikipedia for details..
theres no worries in stripping hehe.. tnx man..

@all
wow.. all my questions are answered.. thanks to all..
THANKS TO ACIDMODS!!!
this is really a big help.....

Ch4rL13 · « **Reply #10 on:** July 02, 2008, 06:26:02 PM »

yea YAY ACIDMODS lol
no one has welcomed you to AM yet so welcome and hope your psp mods go well D:

lol, 36awg omg, how can it get any smaller!!

DubbleDutch · « **Reply #11 on:** July 02, 2008, 10:39:49 PM »

Quote from: JWhiteLightning on July 02, 2008, 11:21:46 AM

DANG!!! There is smaller wire than the 30AWG? yeah, it should work though, but good luck stripping the wire.

you can easily strip the wire with your soldering iron

don't forget to clean the soldering iron after it.

ragrme · « **Reply #12 on:** July 03, 2008, 06:31:46 AM »

@talos
thanks for the welcome..

@dubbledutch
thanks for the info, its a good idea..

DubbleDutch · « **Reply #13 on:** July 04, 2008, 06:35:17 AM »

just put the wire on the iron

then put a knife on the wire, and then slide the wire away from the iron (be sure to keep pressing a little bit with your knife

so the insulating will get off the wire.

Blazinkaos · « **Reply #14 on:** July 09, 2008, 06:38:47 AM »

i use a different way to remove the insulating from the wire. I just dip part of it in the flux then the solder just burns it off perfectly for me.

Jumbo · « **Reply #15 on:** July 09, 2008, 06:47:14 AM »

I just use my teeth lol,

I think everyone has there own way of doing it

pax · « **Reply #16 on:** July 09, 2008, 07:27:06 AM »

+1 for teeth

socomhacker239 · « **Reply #17 on:** July 09, 2008, 12:55:19 PM »

haha i use my teeth to

rceckspurt13 · « **Reply #18 on:** July 09, 2008, 02:48:23 PM »

teeth come in handy sometimes dont they?

ragrme · « **Reply #19 on:** July 10, 2008, 03:21:54 AM »

haha.. i use my teeth also.. but only with small wires.

Jumbo · « **Reply #20 on:** July 10, 2008, 05:48:42 AM »

i guess ALOT of people use teethh lol

Blazinkaos · « **Reply #21 on:** July 10, 2008, 09:58:15 AM »

i used to use my teethe but i keep on breaking the wire

so yea found a different way..

News:

Author Topic: Can i use 32 AWG kynar wire?? (Read 6164 times)