Author Topic: HOW TO WIRE 360 MEMORY CARD TO USB.. (Read 19464 times)

haze · « **Reply #30 on:** February 01, 2009, 11:51:27 AM »

wilson it comes up with torrent sites and i dont trust them.

wilson08 · « **Reply #31 on:** February 02, 2009, 09:39:21 AM »

Quote from: haze on February 01, 2009, 11:51:27 AM

wilson it comes up with torrent sites and i dont trust them.

http://rapidshare.com/files/179137154/The_NXE_Resigner.rar

haze · « **Reply #32 on:** February 03, 2009, 06:34:49 AM »

thanks.

Modded Matt · « **Reply #33 on:** May 03, 2009, 04:02:19 PM »

ok, I am not one to bump old topics, but I dont want to leave this uncorrected. I have spent about 4 hours to get this working, here is what I have found, if anyone got this to work as origionally posted, please let me know!!

I never got this to work with the 2-33ohm resistors. there are two resistors needed, but not 33's, and they should not be on the data lines. if this is done as it is posted here, microsoft xp picks it up as a malfunctioned device, and will not let you force the driver. this is due to the 33 ohm resistors.

that being said, throw away the 33 ohm resistors. get two 10 ohm resistors, so we can create 20ohms of resistance this 20 ohms of resistance needs to be on the power supply (red) wire. this will bring down the 5v. to where it needs to be. there should be no resistance on the data lines atall. and this works fine. win xp will find two devices, one unkonwn and one security device. go into hardware and open the unkown device, update the driver, do it manually (no search) label it as a usb mass storage device, and for a driver point it at the files listed here. done, open with xplorer360!!

let me know if any one got it to work as origionally posted. we dont want incorrect tuts lying around.

wilson08 · « **Reply #34 on:** May 04, 2009, 02:55:01 PM »

Quote from: modded matt on May 03, 2009, 04:02:19 PM

ok, I am not one to bump old topics, but I dont want to leave this uncorrected. I have spent about 4 hours to get this working, here is what I have found, if anyone got this to work as origionally posted, please let me know!!

I never got this to work with the 2-33ohm resistors. there are two resistors needed, but not 33's, and they should not be on the data lines. if this is done as it is posted here, microsoft xp picks it up as a malfunctioned device, and will not let you force the driver. this is due to the 33 ohm resistors.

that being said, throw away the 33 ohm resistors. get two 10 ohm resistors, so we can create 20ohms of resistance this 20 ohms of resistance needs to be on the power supply (red) wire. this will bring down the 5v. to where it needs to be. there should be no resistance on the data lines atall. and this works fine. win xp will find two devices, one unkonwn and one security device. go into hardware and open the unkown device, update the driver, do it manually (no search) label it as a usb mass storage device, and for a driver point it at the files listed here. done, open with xplorer360!!

let me know if any one got it to work as origionally posted. we dont want incorrect tuts lying around.

yhh it took me a while to get it working after i tried a lot of resistors, but i did use 33 something ill check in the morning and post what resistors im using

Dw33z · « **Reply #35 on:** July 24, 2009, 03:58:12 PM »

Quote from: wilson08 on May 04, 2009, 02:55:01 PM

yhh it took me a while to get it working after i tried a lot of resistors, but i did use 33 something ill check in the morning and post what resistors im using

I have built 4 of these with 33 ohm resistors and they all work Flawlssly...

W-Gaming5 · « **Reply #36 on:** July 24, 2009, 05:01:08 PM »

Dw33z · « **Reply #37 on:** July 25, 2009, 09:05:01 AM »

So what! hes wrong !!!

Modded Matt · « **Reply #38 on:** July 25, 2009, 09:41:10 AM »

where did you put the resistor?

Blazinkaos · « **Reply #39 on:** July 25, 2009, 10:17:14 AM »

Seems they have to be placed on the data wires white and green.

Dw33z · « **Reply #40 on:** July 25, 2009, 05:57:23 PM »

Quote from: modded matt on July 25, 2009, 09:41:10 AM

where did you put the resistor?

I did it Exactly as shown in the top picture. I have done it successful on 512,256 and 64mb memory units.

Modded Matt · « **Reply #41 on:** July 26, 2009, 07:40:22 AM »

I have seen the pic and I used the resistors on the data lines, and my pc cannnot read the device, I am using a 512 MC when you remove the resistors from the data lines it will read it imideatly. I have will open my card and do this again, but I know t dont work, as I have personally done this, and I have personally tried to reead it with an xp pc, ad it wont work as shown in th pic. the device is "malfunctioned" according to an xp pc. it will stil work in the xbox, but with the resistors the pc part dont work

Blazinkaos · « **Reply #42 on:** July 26, 2009, 08:23:23 PM »

So this mod doesnt work at all.

Modded Matt · « **Reply #43 on:** July 27, 2009, 05:49:43 AM »

it does work it works perfectly fine, if its done corectly, the tut shows using two 33ohm resistors on the data lines. I could not get the computer to read the memory card to work with any resistor on the data lines, I did use resistors, but I used them on the power line in. (no credit, I found another tut on x-s) the memory card runs at 2.3v, and usb supplies 5v. I used resistors to pull the voltage down slightly(not really nesecary) and nothing on the data lines..and it reads it perfectly, I can transfer game saves from my pc to the card and back. I did this months ago, this member states he used the resistors as shown in this tut and it worked fine, but I call BS, yes it will ork on the xbox end, but when you plug it into a pc 9the whole purpous for doing this, the xp pc wont read it.

Blazinkaos · « **Reply #44 on:** July 27, 2009, 08:18:38 PM »

Oh ok so resistor on the power point only ok.

Modded Matt · « **Reply #45 on:** July 28, 2009, 04:39:18 AM »

you do it, try it both ways and lets settle this once and for all. I trust your openion blazinkaos, lets see what you come up with.

Blazinkaos · « **Reply #46 on:** July 28, 2009, 11:08:25 AM »

If i did have one i would.

wilson08 · « **Reply #47 on:** July 28, 2009, 04:18:30 PM »

Quote from: Dw33z on July 25, 2009, 09:05:01 AM

So what! hes wrong !!!

who me? lol, no im not..

GhoSt · « **Reply #48 on:** August 02, 2009, 12:38:30 AM »

I just got my hands on a 256mb, I trust matt, so what you say is to wire it all up without resistors besides the + wire which needs a 20ohm to bring it to 3.3v?

and this will work with Xport360?

Blazinkaos · « **Reply #49 on:** August 02, 2009, 12:41:34 AM »

Well ill be waiting see the results on it. Curious about though i dont use them.

Modded Matt · « **Reply #50 on:** August 02, 2009, 06:16:37 AM »

I tried it all ways, even wihout any resistors, the 20 ohm is precautionary. my pc would not reconize it with resistance on data, without this resistace, your pc will find the memory card and a security device

GhoSt · « **Reply #51 on:** August 07, 2009, 06:49:58 PM »

yea I did it and the computer picks it up with no resistors on the Data lines, just 2 10 ohms on the 5v, works in Xplorer.

Problem is I can't get the xbox to read it anymore??? any ideas.

News:

Author Topic: HOW TO WIRE 360 MEMORY CARD TO USB.. (Read 19464 times)