Have a problem with a customers PSP

[SN!P3R]

Ok, so i fixed a customers cousins PSP about 2 months ago. i had to replace a screen, which is pretty much idiot proof. his cousin tried playing on a network but cant connect. it gave him an error message: "An Internal Error has occured (80410A0B)". what is that? he said that the wlan light doesnt even come on. His sound works though, so the daughter boards not fried. anyone?

[Jumbo]

Did you change the mobo or wifi board?

[4dP]

sorta i would try a new wifi board and check the antenna and its connections

[SN!P3R]

no i didnt touch the the PSP past the LCD cage. i only replaced the screen. Also i installed CFW 3.80.

[4dP]

no i didnt touch the the PSP past the LCD cage. i only replaced the screen. Also i installed CFW 3.80.

another reinstall then

[SN!P3R]

he said that the wifi stopped working  right after i changed the screen and installed CFW, but i think hes lying. he just called me about 2 weeks ago saying it has this problem. i guess ill charge him for repair work.

[Jumbo]

Redo the FW as 4dP said.

[SN!P3R]

what firmware do you gous recomend? Above 3.80 M33-5.

[4dP]

what firmware do you gous recomend? Above 3.80 M33-5.

just try another prolly newer

[SN!P3R]

anyone know a FW with few or no glitches?

[Slim Hacker]

3.90 m33-3 I had a perfect time with it I had no glitches happen to me.

[Jumbo]

Glitches? Never had problems with any firmwares.. I am on 5.00m33 and 3.90m33-3 both are perfect.

[SN!P3R]

well 5.00 m33 i forget which revision but it had problems with getting connected to the PSN network.

[sakobatoneko]

easy fix, format flash1.

[rceckspurt13]

It may be the wifi componant itself. It is a black rectangle on the back of the wifi board. It's connected with tons of tiny pins. If one comes apart, then it can cause the wifi not to function. It can be caused by dropping it. I think that your "customer" is just looking for someone to blame it on.

[PhenomenalDesigns]

DUDE, on the 3.71 and 3.80 the wireless doesnt work properly, just go to 5.00m33-4

[[HoP]]

in the recovery menu format flash1 and reset settings... although i would recommend installing 5.00 as i see no need to be running older firmwares....

if that doesnt work then try cleaning the connector that connects the wifi board to the mobo

[MAG-123]

Reformat the flash1.