Author Topic: You want 360 cooling aye ???......I'll give you cooling! slaps M$ (Read 5083 times)

Max_Kreeger · « **on:** January 16, 2009, 01:18:40 AM »

BAM!

lol I know its stupid but I'm just waiting for a fan to arrive so I can install it and then put it back together....but for now that fan will do :P

Lol best way to cool it.

Max

psppunk · « **Reply #1 on:** January 16, 2009, 03:22:42 AM »

you sir, are ridiculous....

i wouldnt have done it any other way =P

you should probably make a shroud for that so you dont lose so much air

Max_Kreeger · « **Reply #2 on:** January 16, 2009, 03:27:26 AM »

lol, today it got up to 43 degrees. So no way in hell I'm putting a black case on it lol. I told my family, not to go anywhere near or touch it. Scared they might touch a cap. I should probably put some mesh over it or something. Oh well its only temporary. Works pretty good...maybe I should get one for the other side....hmmmm

Nemesis · « **Reply #3 on:** January 16, 2009, 09:13:08 AM »

ROFL that's class. Kinda dangerous though so be careful

phenoptix · « **Reply #4 on:** January 16, 2009, 09:58:32 AM »

I just hope you don't have a cat!

PspKicks316 · « **Reply #5 on:** January 16, 2009, 12:34:16 PM »

I give it another 2 days like that before it dies.

You NEVER play or operate a console whilst it's on. Even when testing you need to be extremely careful.

802Chives · « **Reply #6 on:** January 16, 2009, 01:02:20 PM »

yup, ghetto cooling at its finest. heres mine like a month before I pulled the plug on her:

that wasnt even the final stages, I ended turning the DVD drive out to get more flow accross the gpu.

I tear up a little just writing about it

robin1989 · « **Reply #7 on:** January 16, 2009, 01:36:21 PM »

someone should do a 360 oil submerable

psp339 · « **Reply #8 on:** January 16, 2009, 03:19:57 PM »

My friend just gave me his old 360 which got the red rings. Its a halo 3 special edition. I'm gonna be replacing the fans in it and do the x clamp fix.

Hazer · « **Reply #9 on:** January 16, 2009, 04:20:05 PM »

Kreeger, you are not pushing any air into those fins. You will burn out the Xbox if you dont point the fan in the same direction as the fins....like right now.

Max_Kreeger · « **Reply #10 on:** January 16, 2009, 10:42:01 PM »

Well its cooling the extra GPU heat sync well, it won't burn out coz the 360 stock fans are still on....Just an extra source of air...Its also cooling all the other components.

~802Chives
What happen to it ?

blackburn · « **Reply #11 on:** January 17, 2009, 12:36:33 AM »

Quote from: Mactastic Mendez on January 16, 2009, 01:36:21 PM

someone should do a 360 oil submerable

if i get another 360 soon, that was going to be my plan!

Slim Hacker · « **Reply #12 on:** January 17, 2009, 01:11:02 AM »

Quote from: PspKicks316 on January 16, 2009, 12:34:16 PM

You NEVER play or operate a console whilst it's on.

Kicks doesnt the console HAVE to be on to play it?

PspKicks316 · « **Reply #13 on:** January 17, 2009, 06:30:13 AM »

Quote from: Slim Hacker on January 17, 2009, 01:11:02 AM

Kicks doesnt the console HAVE to be on to play it?

Meh I meant open.
Lawl. I must've posted that half asleep, wow.

ProperBritish · « **Reply #14 on:** January 17, 2009, 07:34:30 AM »

you know what you could do, get a case, put a Wii, a PS3, and a 360 in it, in a 3 tier setup. Section off the hard drives and disk drives. and then submerge it in oil.

802Chives · « **Reply #15 on:** January 17, 2009, 07:14:10 PM »

Quote from: Max_Kreeger on January 16, 2009, 10:42:01 PM

~802Chives
What happen to it ?

RROD over and over till i finally parted it out and got a new one. I used hot air rework tools that I have at work to try to "reflow" the chips and that kept it alive the better part of 6 months, but eventually it was no use, too much hassle to keep doing it.

Max_Kreeger · « **Reply #16 on:** January 18, 2009, 02:24:20 AM »

Sorry to hear...stupid M$

moeiscool · « **Reply #17 on:** January 18, 2009, 07:44:59 PM »

AHAHAHAHAH omg you my friend are quite the funny man
props on that
gave me a good laugh

but i find that a little risky
cuz so much air escapes

kenoman · « **Reply #18 on:** January 18, 2009, 10:32:57 PM »

dont drop the wrench you would short out your board not good i would put the cover back on

Max_Kreeger · « **Reply #19 on:** January 19, 2009, 12:04:19 AM »

lol I think I'll put something on top of it, today at work I was modifying the output for a power supply for a customer and I accidentally touched the 240V cap.....Wasn't to pleasant

lol :P

Max

Alien_X · « **Reply #20 on:** January 19, 2009, 12:38:41 PM »

I'm sorry, but that comment doesn't make sense (real world sense).

Why are you modifying power supplies?
Why in hell are you touching high voltage caps?
Why are you doing this professionally (at 16) ?

Doesn't add up..

Max_Kreeger · « **Reply #21 on:** January 21, 2009, 12:34:55 AM »

Its a communications company. Two way radios and stuff. Some are installed in places where they need their own power supplies for whatever reason. But the power supplies that we get have a pot on the front to adjust how much voltage it gives out. By modding it, I take out the pot, put a sticker type thing over the hole. Add some didoes, set the pot so it gives out around 13.8V and then heat shrink it so it doesn't change and place it inside the power supply and then put it all back together so the customer can't fiddle around with the voltage. Ummmm why am I touching high voltage caps...I dunno its funs, I like the "buzz"

lol kidding. I accidentally hit it with my finger when turning it off and to answer your last question....I'm doing work experience.

Add up now ? :P

Max

Modded Matt · « **Reply #22 on:** January 21, 2009, 04:43:52 AM »

I cannot believe this thread, which was started as a joke, (I had a good laugh, thanks max) has gone this far and is now way off topic. we should rename this thread to "random flame max's fan" thread.

Max_Kreeger · « **Reply #23 on:** January 22, 2009, 12:00:41 AM »

Lol, thanks man. They're just trying to advise safety. It is a stupid idea, but a funny one.....as long as your careful. Don't worry guys if something stuffs up its my fault. Just have a laugh and poke fun at M$

News:

Author Topic: You want 360 cooling aye ???......I'll give you cooling! *slaps M$* (Read 5083 times)

Author Topic: You want 360 cooling aye ???......I'll give you cooling! slaps M$ (Read 5083 times)