Author Topic: T-Shirt Size (Read 13743 times)

robin1989 · « **on:** January 21, 2009, 03:55:07 PM »

i want to do some market research

What size t-shirt do you take its a cotton standard T

Measurements: Across chest (cm): XS (50.5); S (53); M (55.5); L (58); XL (60.5); 2XL (63); 3XL (65.5).

also would you buy an acidmods t-shirt to support the site.

there is no set price but i would guess it to be between $13 and $22 and all would cost the same regardless of size

OK GUYS

we found that it would cost us a fair bit of money to get a load of shirts printed to then sell on the site and we wouldn't be able to offer as wide a range of sizes.
so we whent with cafepress which allows us to offer lots of merchandise in different colours and sizes and we can change the designs as we please meaning mucho cheepo for me

http://www.cafepress.com/acidmods_shop

and it means that we still get a little kickback to support the site

Tri-edge · « **Reply #1 on:** January 21, 2009, 04:12:13 PM »

If you guys vote and give us enough feedback we can proceed and actually get t-shirts made. So don't be shy! post your comments!

robin1989 · « **Reply #2 on:** January 21, 2009, 04:13:36 PM »

we may get them done there is nothing set in stone some details need sorting out first and maybe some preorders will be needed to get them done

FreeK · « **Reply #3 on:** January 21, 2009, 04:55:46 PM »

i usually get large. but if its more then 75% cotton then ill get 1x. because cotton shrinks in the wash and i hate tight shirts

alentris · « **Reply #4 on:** January 21, 2009, 04:57:45 PM »

Am I the only small?? XD

bustinthejustin · « **Reply #5 on:** January 21, 2009, 05:12:30 PM »

I don't know

I will measure later. Yeah cotton shrinks and I always forget that, so my clothes always end up too small...

Kilokk · « **Reply #6 on:** January 21, 2009, 05:19:25 PM »

XL 4 me...

Tri-edge · « **Reply #7 on:** January 21, 2009, 05:55:40 PM »

medium

whitetop · « **Reply #8 on:** January 21, 2009, 05:58:44 PM »

1xl in size and yes i would buy to surport the site and $20 sounds like a good deal and designes would make the marketing reseach better

robin1989 · « **Reply #9 on:** January 21, 2009, 06:08:53 PM »

we havnt set any designs yet

Conansr · « **Reply #10 on:** January 21, 2009, 06:14:51 PM »

A 2XL would work for me due to shrinkage and all, and no I'm not fat!! ha ha , and yes I believe $20 to be a fair amount of funds...

Korlithiel · « **Reply #11 on:** January 21, 2009, 06:23:24 PM »

I forgot that you said cotton, I probably should have voted L then.

That aside, though I enjoy the website I am unlikely to buy a T-shirt unless I really like the design. I just don't visit often enough, and though I could blame the design or the irritating little icons it is really just I've lost interest with modding my consoles for now.

Assassin_Bean · « **Reply #12 on:** January 21, 2009, 06:25:00 PM »

Personally, I would love to own an Acidmods shirt, and I think that $20 is a perfect amount. Large is good for me. I love modding and wish to proudly display it on a shirt.

ph7ryan · « **Reply #13 on:** January 21, 2009, 06:26:44 PM »

I would need probably an xs, maybe a small would fit...

But I would wan to know what it would look like before...

kink192 · « **Reply #14 on:** January 21, 2009, 06:31:33 PM »

xl-2xl both are a good fit but if it shrinks the 2xl fits better.

folklord36 · « **Reply #15 on:** January 21, 2009, 06:58:25 PM »

Large for me I want one! Might buy an XL too just incase. Idk about everyone else but I wouldnt buy one with just the big AM logo of a PSP on it it should be more fashonable and easy to match with outfits we allready have I allways match lol. Maybe like blue lightning from left sholder to bottom right radomly and on the left side ACIDMODS in big blue silver letters going down under ur left arm?

bustinthejustin · « **Reply #16 on:** January 21, 2009, 07:08:45 PM »

I like the idea of a lighting bolt thing down the front of the shirt, and maybe Acidmods in the top left corner, and on the back, for staff members, etc. words like GLOBAL MODERATOR, ADMINISTRATOR, ART TEAM, etc.

treemty · « **Reply #17 on:** January 21, 2009, 07:10:01 PM »

Quote from: folklord36 on January 21, 2009, 06:58:25 PM

Large for me I want one! Might buy an XL too just incase. Idk about everyone else but I wouldnt buy one with just the big AM logo of a PSP on it it should be more fashonable and easy to match with outfits we allready have I allways match lol. Maybe like blue lightning from left sholder to bottom right radomly and on the left side ACIDMODS in big blue silver letters going down under ur left arm?

dude i agree 100% and i like how ub think,pictured in head...awesome
yes it HAS to be stylish or i will use as gym shirt
ill take an xl or l FO'SHO
AND preorder sounds great

FreeK · « **Reply #18 on:** January 21, 2009, 07:21:46 PM »

i was thinking the same thing as folklord the whole time. i was just too lazy to make one

i did basically what he was saying just backwards

and the stuff that comes off the side can wrap around to the back

that shirt would be beast.

DarkShot · « **Reply #19 on:** January 21, 2009, 07:28:05 PM »

Yes Definitely a black tee.

I'd buy it if I had the money.

123sample · « **Reply #20 on:** January 21, 2009, 09:19:41 PM »

This is what I've been waiting for..

I'll definitely get one, Medium size prefer..

xmaxonx · « **Reply #21 on:** January 21, 2009, 09:29:50 PM »

I wear a large. I would more than likely purchase a t-shirt to support the site. If you get one designed, I will check it out. Thanks a lot.

Tri-edge · « **Reply #22 on:** January 21, 2009, 09:47:20 PM »

Quote from: folklord36 on January 21, 2009, 06:58:25 PM

Large for me I want one! Might buy an XL too just incase. Idk about everyone else but I wouldnt buy one with just the big AM logo of a PSP on it it should be more fashonable and easy to match with outfits we allready have I allways match lol. Maybe like blue lightning from left sholder to bottom right radomly and on the left side ACIDMODS in big blue silver letters going down under ur left arm?

Quote from: FreeK on January 21, 2009, 07:21:46 PM

i was thinking the same thing as folklord the whole time. i was just too lazy to make one

i did basically what he was saying just backwards

and the stuff that comes off the side can wrap around to the back

that shirt would be beast.

The problem with your design is that we can only make them with the design on the front and on the back. I can't do it on the shoulders.

Quote from: bustinthejustin on January 21, 2009, 07:08:45 PM

I like the idea of a lighting bolt thing down the front of the shirt, and maybe Acidmods in the top left corner, and on the back, for staff members, etc. words like GLOBAL MODERATOR, ADMINISTRATOR, ART TEAM, etc.

I can do that but it costs a LOT extra. You see we put the design on a screen and then we use the screen to put the ink on the shirt. But it costs $10-20 PER screen so if you want that you would have to make a screen for each position (and that's kind of stupid as people switch positions a lot).

FreeK · « **Reply #23 on:** January 21, 2009, 09:55:27 PM »

Quote from: Tri-edge on January 21, 2009, 09:47:20 PM

1.The problem with your design is that we can only make them with the design on the front and on the back. I can't do it on the shoulders.

2.I can do that but it costs a LOT extra. You see we put the design on a screen and then we use the screen to put the ink on the shirt. But it costs $10-20 PER screen so if you want that you would have to make a screen for each position (and that's kind of stupid as people switch positions a lot).

1. you could if its a professional shirt making system just you dont know how to. but design can be adjusted easily.

2. your right. i was about to say that positions arent permanent and can change at any second so it would be a waste of time and money.

Tri-edge · « **Reply #24 on:** January 21, 2009, 10:01:56 PM »

Quote from: FreeK on January 21, 2009, 09:55:27 PM

1. you could if its a professional shirt making system just you dont know how to. but design can be adjusted easily.

I probably could get it done on the shoulder but it will be a lot harder and a pain in the butt to do. It's easier to do it is in the center of the shirt. But if you guys really want it there I will see what I can do. I know somebody who has a professional t-shirt printing machine (not official name)

redryno1221 · « **Reply #25 on:** January 22, 2009, 01:13:06 AM »

I'd buy a couple depending on how the end product looks....may even show some friends if they're too awesome to pass up

vgamer360 · « **Reply #26 on:** January 22, 2009, 03:41:43 AM »

I might possibly buy depending on the design. I have always wanted to help you guys out ever since the first month I registered here.

AgentSmith · « **Reply #27 on:** January 22, 2009, 06:28:49 AM »

I wear XL (60.5) - and I would possibly purchase a t-shirt in the future depending on its style.

edge · « **Reply #28 on:** January 22, 2009, 08:50:04 AM »

If it's sweet enough, count me it, I have one question tho, will you guys be shipping overseas (I live in France)?

robin1989 · « **Reply #29 on:** January 22, 2009, 09:08:16 AM »

yes we would ship overseas plus i live in the UK

News:

Poll

what size t-shirt do you take?

Author Topic: T-Shirt Size (Read 13743 times)