help me with rapid fire

[bigd22686]

when you take off the batery pack it says tp3. by the p1 led it says d21. according to ppl on youtube the way i make rapid fire is solder one wire to the middle pin under the a button. the other one either on the top/bottom pin under a. on the led, on the dot next to the led or to the middle hole to the left of the resistor. i tried all of these and the didnt work. oh and i am using a momentary push button. what am i doing wrong, why can the ppl on youtube get it to work or is it all just fake?

[Modded Matt]

there are two types of controllers, look here https://www.acidmods.com/forum/index.php?topic=24699.0 to see which one you have, you can only do this with a matrix, if you do have a matrix look here https://www.acidmods.com/forum/index.php?topic=17135.0    for the solder points. it is not fake, it may not work very well and will not work for cod5 but it is not fake!!

for this to work it must be a wireless controller, without play and charge hooked up, and the batteries must not be full, they need to be slightly depleted

make sure you meet all these requirements, and if you do, and still need help I will walk you through it.