idea for a mod

[buickgnx]

what is we placed a 8-PIN SOCKET some where on the controller. then wire it like you would for a chip. then if there's a patch you could go re program it if it's yours. any ideas. you could place it any where on the out side of the controller. i was thinking by the mic port.

[Ben.]

This has already been done.. But good idea still..

https://www.acidmods.com/forum/index.php?topic=28970.0

That Kinda thing.. ^^^

[mikespartian114]

i put mine here

[Jumbo]

i put mine here

Why? Now you cant use the battery...

[ryan0]

could be done pretty easily without putting it in the battery compartmentor even using an ic socket for that matter,you COULD wire it up so you can reflash the chip through the serial port on the bottom of the controller,but you'd have to wire up a switch to change between reflashing and headset/chatpad mode,which wouldn't be that hard I guess.I'd do it if I was arsed but I don't usually play 360 anymore.

[PspKicks316]

i put mine here

Oh wow...I don't know where to begin.

But, why would you do that? Now you can't USE the controller.

[mikespartian114]

this is mine

it works perfectl fine i just keep it pluged in with the play n carage but thats the only flaw no wireless any more but it was the only spot to hide it  on the out side of the controler with out holes or cuts

[Jumbo]

Why didnt you just put it in the damn controller?!

[mikespartian114]

cuz then i would have to unscrew it to reprogram it and now it has leds and built in mic and head phone jack and it was a pain in the to close up

[Modded Matt]

u need to rethink and rework this in my openion, here is a link to the properway to mount an external socket, and still use your play and charge pack.

https://www.acidmods.com/forum/index.php?topic=28970.0

[ryan0]

cuz then i would have to unscrew it to reprogram it and now it has leds and built in mic and head phone jack and it was a pain in the to close up

And tell me,how many times have you reflashed it since?And more importantly does the convenience of not having to open the controller to reflash the chip compensate for not having a battery?

[Jumbo]

I dont think its worth it ryan lol. Also it may have been easier if you weren't using 24 gauge wire......
And built in mic is kinda well i dont wanna say worthless because i do leds mods (Lol) but its kinda stupid because the mic is crappy when its next to your mouth, now its near your lap.....

[Modded Matt]

LOL I see your point guys, as does he,by now I assume, but it is a mod, his mod, and we should give him suggestions, to help improve it. lets try not to be so judgmental so to speak, even though I see your point. this goes back to the old saying one mans junk is another mans  gold.

[mikespartian114]

i no its not the best place but point my xbox sits on my desk hooked to my monitor so i not mind the chrage and i think its a good placement cuz i am alwasys flashing it cuz i always trying new codes just alone figuring out speeds for my guns was like 15 flashes but i do have a new one in the making full led x,y,b,a,rol,guided buton and motor led and x,y,a,b are touch activated, so hopefuly its comes out good.

p.s. i cant think of the colors to paint it, i was thinking three color schem and that would go good with red and blue leds and something to macth the xbox and controler if there is any sugestions they would be great