Author Topic: need ideas (Read 7595 times)

Modded Matt · « **on:** October 07, 2009, 06:07:35 AM »

ok so I have done 360 controllers upside down and sideways lol. I need a new idea, or request. let me know your thoughts or if anyone has a special request for a controller set up let me know and we will see if we can make it reality.

dedafmonteur · « **Reply #1 on:** October 07, 2009, 06:22:20 AM »

make a ps3 controller work on the 360, schouldnt be that hard

or make a ps3 controller with rapidfire

Modded Matt · « **Reply #2 on:** October 07, 2009, 10:53:54 AM »

Iwas thinking of an xbox controller woring with the ps3, not super sure about using a ps3 controller on the xbox, me personally the ps3 controller is part of what turns me off about my ps3. what would be uber cool is if I could put a selector switch so it could work with either system...that would never work.

bluetooth to rf..rf to bluetooth or swap and rebuild the internals. i will think about that. good call i know nothing about the ps3 controller as I have never opened it lol

robin1989 · « **Reply #3 on:** October 07, 2009, 11:29:39 AM »

Either a ps3 controller in a 360 as I prefer the feel of the 360 controller. Make the buttons stealthy and have them touch sesitive so that the entire controler is smooth apart from the joy sticks. Or make everything nibs so that it's 4 nibs and no buttons.

802Chives · « **Reply #4 on:** October 07, 2009, 12:08:24 PM »

analogs on the back for your middle finger, move abxy to where right analog was. maybe add left and right analog click to front?

dedafmonteur · « **Reply #5 on:** October 07, 2009, 12:12:53 PM »

multifunctional controller?

360/ps3 and maybe wii and ps2

would be sexy though

budgray19 · « **Reply #6 on:** October 07, 2009, 12:37:26 PM »

yea use a 360 controller for ps3 and 360
the ps3 uses what for ps3 controller, blu tooth right?

i mean essentally everythings in the same spot just make axyb work like xo[]A

Modded Matt · « **Reply #7 on:** October 07, 2009, 03:40:12 PM »

uh no, its rf vs bluetooth, I could rework the ps3 system to fit inside an xbox controller but prolly not 360 into a ps3.

multifunctional would be a nightmare. as its rf vs bluetooth. you would have to pick one and convert the signal of for the other, it would take alot of programing.

i like the touch sinsitive idea also that sounds awsome!!! this is defenatly a posibility..

dedafmonteur · « **Reply #8 on:** October 08, 2009, 06:14:51 AM »

matt you can put both systems in one onctroller and use a switch to switch from console.
it could be done....

budgray19 · « **Reply #9 on:** October 08, 2009, 07:12:29 AM »

it could be done.. but how big and bulk do u want the controller to be

802Chives · « **Reply #10 on:** October 08, 2009, 08:41:07 AM »

could it be done?.... yes. However there are some fundamental differences from MS controller to Sony's that make this much more difficult a mod then cutting and jumping and using some million pole switch. The triggers and analog sticks are potentiometers on MS controllers. On Sony triggers are pressure sensative and are not pots, neither are the analogs, they use some magnetic sensing that is not anything like a potentiometer(they may be conditioned to a similar signal but not sure). That means that you have to convert either the potentiometers into a form that Playstation can understand or vice versa. This mod will take electrical signal processing as well as a switch that can control something like 30 individual poles for each button as well as power.

Not exactly a weekend project.

Blue tooth to RF or vice versa is also something that would not be possible without decoding MS proprietary RF signals. which will most definately put you in legal trouble becaus MS charges big money in order to license an after market controller. with Blue tooth it may be possible to manipulate depending on how open the Sony device is, in other words if you could sync a sony controller to say a laptop and use it, then you could conceivable make a bluetooth reciever that can in turn control a MS controller. Way more difficult then it is worth imho

dedafmonteur · « **Reply #11 on:** October 08, 2009, 10:57:10 AM »

build a lighter in your controller, i always wanted that for my w*ed....lol

i allways lose my controllers maybe build a finder in it, so when you whisle it will trigger a sound and lights.
you can buy those pc's pre-made for like 4 dollar.
i did it with my psp it rocks

just trying to help!

phenoptix · « **Reply #12 on:** October 08, 2009, 12:43:19 PM »

how about a controller with fully reprogrammable buttons?

Modded Matt · « **Reply #13 on:** October 08, 2009, 01:18:50 PM »

like remapable buttons? or for like combos on a button? remapabel you sould have to cut all the traces and have a ass load of inputs and outputs..do able..lots of code.

I love the idea, of the sleek, no button, touch sincitive controller, I acctually love this idea, but am have alot of trouble finding a sensor that would be practical, not to mention cost effective. lol

robin1989 · « **Reply #14 on:** October 08, 2009, 01:28:36 PM »

what about the buttons used on these new fangled phones.

koldkiller · « **Reply #15 on:** October 08, 2009, 02:38:55 PM »

You would to big of a pro if you did the controller swap mod.

I have a request for a controller. Make a(n) Xbox360 controller in a PS3 controller case. Use the current player indicator into the ring to tell you which player you are obviously. Replace the L3 and R3 with the ability to change firemodes. Make the USB into the battery charger. Put the headset/keyboard hole at the bottom of the PS3 controller and make it look like it was meant to be there. Paint the controller white. I would totally buy this from you.

phenoptix · « **Reply #16 on:** October 09, 2009, 10:29:36 AM »

I only put the mappable button idea out there as RDC has done one on xbox-scene.
If you could work a tilt switch into a controller that would be rather cool.

koldkiller · « **Reply #17 on:** October 09, 2009, 10:45:20 AM »

Quote from: phenoptix on October 09, 2009, 10:29:36 AM

I only put the mappable button idea out there as RDC has done one on xbox-scene.
If you could work a tilt switch into a controller that would be rather cool.

Can you post a link? I would like to see this.

Modded Matt · « **Reply #18 on:** October 09, 2009, 11:55:58 AM »

I have the tilt mod completed.

moddedmatt - tiltfrstvid.flv

koldkiller · « **Reply #19 on:** October 09, 2009, 12:12:38 PM »

Quote from: modded matt on October 09, 2009, 11:55:58 AM

I have the tilt mod completed.

moddedmatt - tiltfrstvid.flv

How old are you? Can you show schematics? How long were you working on it? Great job.

dedafmonteur · « **Reply #20 on:** October 09, 2009, 01:52:16 PM »

it's nog bad, but not THAT sensitive.

frenulem - No.5417 · « **Reply #21 on:** October 09, 2009, 04:54:45 PM »

try qauntam tunneling its a new kinda switch for pressure sensitive

Modded Matt · « **Reply #22 on:** October 09, 2009, 08:49:00 PM »

here is the rest of the tilt mod if your intrested.

https://acidmods.com/forum/index.php?topic=27484.0

I am not sure what my age has to do with anything, but I am 29

mikespartian114 · « **Reply #23 on:** October 09, 2009, 11:14:46 PM »

how about a clear case and sound reactive leds linked to the speaker load on the board, so when they talk it flashes?????????? if thats posible

dedafmonteur · « **Reply #24 on:** October 10, 2009, 05:33:31 AM »

maybe build in a mic. in the controller.
would be nice

koldkiller · « **Reply #25 on:** October 10, 2009, 12:53:47 PM »

Quote from: modded matt on October 09, 2009, 08:49:00 PM

here is the rest of the tilt mod if your intrested.

https://acidmods.com/forum/index.php?topic=27484.0

I am not sure what my age has to do with anything, but I am 29

Well just trying to match an ability with an age. What you did there was amazingly nice. I want one.

mikespartian114 · « **Reply #26 on:** October 10, 2009, 11:22:14 PM »

i did two built in mics, dint work so well, hard to finded a mic that pics up voice from about 2-3 ft, plus u have to put in a head phone jack and use ipod headphones or the mic wont turn on

phenoptix · « **Reply #27 on:** October 11, 2009, 08:39:13 AM »

Ah so tilt is a llamma product! I'm a bit out of touch on controller mods it seems, my world is all about the LEDs!
The remapped controller can be found here
Right with you on the age Matt, I'm 30 this year, ughh...

Modded Matt · « **Reply #28 on:** October 11, 2009, 09:18:25 AM »

llamma dosnt have products, they just mark them up and resell. tallismoon made the board

aspin · « **Reply #29 on:** October 20, 2010, 02:08:52 PM »

modded matt i no this hasnt had any posts in a while but is there any remmapable button chips out for xbox 360 controllers mate?

News:

Author Topic: need ideas (Read 7595 times)