Author Topic: 360 D-pad/ psp nub hybred  (Read 6527 times)

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
360 D-pad/ psp nub hybred
« on: February 03, 2010, 08:53:11 AM »
ok guys this is a new concept for a D-pad replacment on the 360 pad. after a bit of thought i decided i'd need to use a A2D or Razor-x.. but then i saw this thread from Wetfusion and decided to try that method....


here you can see the ground ring and 4 contacts i made


the underside of the nub showing the wiring




and closed back up

so that was the nub prepared. after that i wired it to my pad for a quick test

first test
it worked

now for the case prep... i simply removed the old D-pad, used a dremel to remove the ridge in the d-pad housing then drilled a small hole for my wires to run through


glued the nub in place over it


these are the contacts i exposed and tinned to wired the nub to


and wired up


 then closed back up in the pad


i am planning on getting a psp case to chop up as a cover plate for this... but it'll do for now

finshed pad
« Last Edit: February 04, 2010, 06:45:48 PM by spurgurgle »

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline laxboy

  • i like airplanes
  • Acidmods Alumni
  • E = MC² Mad Scientist
  • *
  • Posts: 1627
  • Post quality +12/-0
  • Gender: Male
  • CTVFD 9/11 lost but never forgotten
Re: 360 D-pad/ psp nub hybred
« Reply #1 on: February 07, 2010, 10:15:56 AM »
hope that the articals spark some posts here =) good job spurgurgle

Offline gamerdude767

  • Blogs & Media Member
  • Acid Modder
  • *
  • Posts: 634
  • Post quality +1/-0
  • Gender: Male
Re: 360 D-pad/ psp nub hybred
« Reply #2 on: February 07, 2010, 10:21:03 AM »
Done this mod ages ago. I used a razor x board though.

 Good work Spurg, Always enjoy your mods :D

Quote from: H-Sauce
**Long Pause**........
Yup, thats better than balloons

Offline t0pP8uZz

  • Granny Spanker
  • *
  • Posts: 477
  • Post quality +4/-0
  • Gender: Male
  • Programmer / Security Expert
    • http://milw0rm.com/author/1141
Re: 360 D-pad/ psp nub hybred
« Reply #3 on: February 07, 2010, 12:45:46 PM »
Very nice little mod, Need a nice method to fill in the rest of the dpad area though. Your gona file down a psp case? that should look very nice.

Umm can you order PSP nub spares?

Offline froggy

  • SAN ANTO'S CUSTOM CHEVY'S
  • Granny Spanker
  • *
  • Posts: 435
  • Post quality +2/-0
  • Gender: Male
  • Green Mexican
Re: 360 D-pad/ psp nub hybred
« Reply #4 on: February 07, 2010, 01:18:31 PM »
Yea You Can Order Spare Nubs,
Oh And Nice Mod, I want To Do This To My psp
ITS TIME FOR IGNITION, AND STRAIGHT AUTOMOBILE PIMPIN!


Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: 360 D-pad/ psp nub hybred
« Reply #5 on: February 07, 2010, 06:00:37 PM »
yeah i hope to get a white psp case with a similar fell/look to the 360 pad and just cut and sand it to a perfect fit over the old dpad housing to tidy it up a bit.....

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: 360 D-pad/ psp nub hybred
« Reply #6 on: February 07, 2010, 11:35:53 PM »
Awesome!! It would serve with any stick of psp?
« Last Edit: February 07, 2010, 11:37:05 PM by rafaliyo86 »

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: 360 D-pad/ psp nub hybred
« Reply #7 on: February 08, 2010, 03:21:45 AM »
Awesome!! It would serve with any stick of psp?
umm if ya mean will it work with any psp nub.... then yeah i think it willl. i got my nubs off of ebay for a few £££

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline TeaBubblez

  • ~BubbleTea~
  • Ω Allumnist Ω
  • *
  • Posts: 131
  • Post quality +0/-0
  • Gender: Male
Re: 360 D-pad/ psp nub hybred
« Reply #8 on: February 08, 2010, 03:59:18 AM »
it must be a phat nub. Good job spurg !


Offline Squeck

  • Fart Sniffer
  • *
  • Posts: 46
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 360 D-pad/ psp nub hybred
« Reply #10 on: February 08, 2010, 04:50:50 AM »
You can find every type of psp analog stick on dealextreme for 2-3$.


Offline wetfusion

  • Who Farted ???
  • *
  • Posts: 233
  • Post quality +6/-5
Re: 360 D-pad/ psp nub hybred
« Reply #11 on: February 08, 2010, 04:52:41 AM »
thanks for credited me in the mods spurgurle..
:)

Post Merge: February 08, 2010, 04:54:36 AM
thanks for credited me in the mods spurgurgle..
:)
« Last Edit: February 08, 2010, 04:54:36 AM by wetfusion »

Offline rafaliyo86

  • Acid Modder
  • *
  • Posts: 569
  • Post quality +12/-1
  • Gender: Male
  • Acidmods User
Re: 360 D-pad/ psp nub hybred
« Reply #12 on: February 08, 2010, 05:33:37 AM »
You can find every type of psp analog stick on dealextreme for 2-3$.

Thanks!!

Offline 802Chives

  • Sargeant at Arms
  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1304
  • Post quality +10/-0
  • Gender: Male
Re: 360 D-pad/ psp nub hybred
« Reply #13 on: February 09, 2010, 09:26:29 AM »
very nice spurg! probably would work well with certain xbla games. keep em coming


Offline Squeck

  • Fart Sniffer
  • *
  • Posts: 46
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 360 D-pad/ psp nub hybred
« Reply #14 on: February 09, 2010, 11:27:35 AM »
I don't know if i should try this mod or not... Can i use a psp nub without taking it apart? Any ways to make it look better?

Offline spurgurgle

  • Acidmods Alumni
  • Millennium Poster
  • *
  • Posts: 1121
  • Post quality +17/-1
  • Gender: Male
  • call me spurg
    • my blog
Re: 360 D-pad/ psp nub hybred
« Reply #15 on: February 09, 2010, 11:45:47 AM »
no u need to take the nub apart...... it may be easier to do with a razor-x in stead of wetfusions method.....

and as for making look better
yeah i hope to get a white psp case with a similar fell/look to the 360 pad and just cut and sand it to a perfect fit over the old dpad housing to tidy it up a bit.....
read the thread........

Sigs made by Ken and blazin from the AM Art team cheers guys.....
Spurgurgle d.t com
"I'm kinda like a typo, not quite right, but most people still understand me"

Offline Squeck

  • Fart Sniffer
  • *
  • Posts: 46
  • Post quality +0/-0
  • Gender: Male
  • Acidmods User
Re: 360 D-pad/ psp nub hybred
« Reply #16 on: February 09, 2010, 11:57:37 AM »
I read it but i don't have the tools to do that, i'll order one nub as they are so cheap.

 

SMF spam blocked by CleanTalk
SimplePortal 2.3.5 © 2008-2012, SimplePortal